井冈山大学学报(自然科学版)
井岡山大學學報(自然科學版)
정강산대학학보(자연과학판)
JOURNAL OF JINGGANGSHAN UNIVERSITY(SCIENCE AND TECHNOLOGY)
2013年
3期
18-21
,共4页
己二酸%H4SiW12O40/ZrO2-Al2O3%催化
己二痠%H4SiW12O40/ZrO2-Al2O3%催化
기이산%H4SiW12O40/ZrO2-Al2O3%최화
adipic acid%H4SiW12O40/ZrO2-Al2O3%catalysis
以环己酮为原料,w(H2O2)=30%的过氧化氢为氧化剂,在硫酸氢钠作为助剂的条件下,采用H4SiW12O40/ZrO2-Al2O3作催化剂合成己二酸。探讨H4SiW12O40/ZrO2-Al2O3对合成己二酸的催化活性,较系统地研究了催化剂用量、氧化剂用量、酸性助剂硫酸氢钠用量及反应时间四因素对反应的影响。实验表明:H4SiW12O40/ZrO2-Al2O3催化剂是合成己二酸的良好催化剂,在固定环己酮用量为0.1 mol的情况下,当催化剂用量为2 g,氧化剂用量为50 mL,酸性助剂硫酸氢钠的用量为0.05 g,反应时间为6 h的优化条件下,产品收率可达78.7%。
以環己酮為原料,w(H2O2)=30%的過氧化氫為氧化劑,在硫痠氫鈉作為助劑的條件下,採用H4SiW12O40/ZrO2-Al2O3作催化劑閤成己二痠。探討H4SiW12O40/ZrO2-Al2O3對閤成己二痠的催化活性,較繫統地研究瞭催化劑用量、氧化劑用量、痠性助劑硫痠氫鈉用量及反應時間四因素對反應的影響。實驗錶明:H4SiW12O40/ZrO2-Al2O3催化劑是閤成己二痠的良好催化劑,在固定環己酮用量為0.1 mol的情況下,噹催化劑用量為2 g,氧化劑用量為50 mL,痠性助劑硫痠氫鈉的用量為0.05 g,反應時間為6 h的優化條件下,產品收率可達78.7%。
이배기동위원료,w(H2O2)=30%적과양화경위양화제,재류산경납작위조제적조건하,채용H4SiW12O40/ZrO2-Al2O3작최화제합성기이산。탐토H4SiW12O40/ZrO2-Al2O3대합성기이산적최화활성,교계통지연구료최화제용량、양화제용량、산성조제류산경납용량급반응시간사인소대반응적영향。실험표명:H4SiW12O40/ZrO2-Al2O3최화제시합성기이산적량호최화제,재고정배기동용량위0.1 mol적정황하,당최화제용량위2 g,양화제용량위50 mL,산성조제류산경납적용량위0.05 g,반응시간위6 h적우화조건하,산품수솔가체78.7%。
Adipic acid was synthesized from cyclohexanone by using 30 percent hydrogen peroxide as oxidant, sodium bisulfate as cocatalyst, in the presence of H4SiW12O40/ZrO2-Al2O3 as catalyst. The factors influencing the synthesis were discussed and the best reaction conditions were found out. The experiments show that:H4SiW12O40/ZrO2-Al2O3 catalyst is an excellent catalyst for the synthesis of adipic acid. The optimum conditions are as 0.10 mol fixed cyclohexanone, 2 g H4SiW6Mo6O40/SiO2, 50 mL H2O2, 0.05 g sodium bisulfate, 6 h reaction time. Under the optimum conditions, the yield of adipic acid is 78.7%.