中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2013年
6期
1633-1639
,共7页
鞠博伟%王先友%魏启亮%吴春%杨秀康%舒洪波%宋云峰%温伟成
鞠博偉%王先友%魏啟亮%吳春%楊秀康%舒洪波%宋雲峰%溫偉成
국박위%왕선우%위계량%오춘%양수강%서홍파%송운봉%온위성
锂离子电池%LiNi0.5Mn1.5O4%正极材料%电化学性能
鋰離子電池%LiNi0.5Mn1.5O4%正極材料%電化學性能
리리자전지%LiNi0.5Mn1.5O4%정겁재료%전화학성능
lithium ion battery%LiNi0.5Mn1.5O4%cathode material%electrochemical performance
以化学共沉淀法制备的球形Ni0.25Mn0.75CO3为前驱体合成高电压正极材料LiNi0.5Mn1.5O4,探讨用前驱体与Li2CO3直接反应和用前驱体分解后的氧化物与Li2CO3反应两种工艺路线对LiNi0.5Mn1.5O4形貌和电化学性能的影响。用扫描电镜(SEM)和X射线衍射(XRD)对Ni0.25Mn0.75CO3前驱体和LiNi0.5Mn1.5O4样品进行表征,用充放电测试和循环伏安法对LiNi0.5Mn1.5O4样品进行电化学性能研究。结果表明:两种方法合成的LiNi0.5Mn1.5O4均具有尖晶石型结构。但以前驱体Ni0.25Mn0.75CO3直接与Li2CO3反应合成的LiNi0.5Mn1.5O4的一次粒子颗粒较大,形貌较差,性能也较差;而以前驱体分解后的氧化物与 Li2CO3反应合成的 LiNi0.5Mn1.5O4的形貌及性能均较好。在3.0~4.9 V的电压范围内,1C倍率下电池的放电比容量达到136.3 mA?h/g,循环100次仍有126.5 mA?h/g,且材料具有较好的倍率性能;5C倍率下的首次放电比容量高达120.7 mA?h/g。
以化學共沉澱法製備的毬形Ni0.25Mn0.75CO3為前驅體閤成高電壓正極材料LiNi0.5Mn1.5O4,探討用前驅體與Li2CO3直接反應和用前驅體分解後的氧化物與Li2CO3反應兩種工藝路線對LiNi0.5Mn1.5O4形貌和電化學性能的影響。用掃描電鏡(SEM)和X射線衍射(XRD)對Ni0.25Mn0.75CO3前驅體和LiNi0.5Mn1.5O4樣品進行錶徵,用充放電測試和循環伏安法對LiNi0.5Mn1.5O4樣品進行電化學性能研究。結果錶明:兩種方法閤成的LiNi0.5Mn1.5O4均具有尖晶石型結構。但以前驅體Ni0.25Mn0.75CO3直接與Li2CO3反應閤成的LiNi0.5Mn1.5O4的一次粒子顆粒較大,形貌較差,性能也較差;而以前驅體分解後的氧化物與 Li2CO3反應閤成的 LiNi0.5Mn1.5O4的形貌及性能均較好。在3.0~4.9 V的電壓範圍內,1C倍率下電池的放電比容量達到136.3 mA?h/g,循環100次仍有126.5 mA?h/g,且材料具有較好的倍率性能;5C倍率下的首次放電比容量高達120.7 mA?h/g。
이화학공침정법제비적구형Ni0.25Mn0.75CO3위전구체합성고전압정겁재료LiNi0.5Mn1.5O4,탐토용전구체여Li2CO3직접반응화용전구체분해후적양화물여Li2CO3반응량충공예로선대LiNi0.5Mn1.5O4형모화전화학성능적영향。용소묘전경(SEM)화X사선연사(XRD)대Ni0.25Mn0.75CO3전구체화LiNi0.5Mn1.5O4양품진행표정,용충방전측시화순배복안법대LiNi0.5Mn1.5O4양품진행전화학성능연구。결과표명:량충방법합성적LiNi0.5Mn1.5O4균구유첨정석형결구。단이전구체Ni0.25Mn0.75CO3직접여Li2CO3반응합성적LiNi0.5Mn1.5O4적일차입자과립교대,형모교차,성능야교차;이이전구체분해후적양화물여 Li2CO3반응합성적 LiNi0.5Mn1.5O4적형모급성능균교호。재3.0~4.9 V적전압범위내,1C배솔하전지적방전비용량체도136.3 mA?h/g,순배100차잉유126.5 mA?h/g,차재료구유교호적배솔성능;5C배솔하적수차방전비용량고체120.7 mA?h/g。
Spherical LiNi0.5Mn1.5O4 powder was synthesized from the coprecipitated Ni0.25Mn0.75CO3 precursor. The effects of two synthesis routes, Ni0.25Mn0.75CO3 precursor directly mixed with Li2CO3 and (Ni0.25Mn0.75)2O3 mixed with Li2CO3, on the morphology and electrochemical performance of LiNi0.5Mn1.5O4 cathode material were investigated. XRD, SEM, charge-discharge tests and cyclic voltammetry were utilized to characterize the properties of samples. The XRD results indicate that the LiNi0.5Mn1.5O4 samples synthesized from both methods exhibit spinel structure. The morphologies of the samples prepared from two routes are spherical. However, the LiNi0.5Mn1.5O4 sample synthesized directly from mixture of Ni0.25Mn0.75CO3 and Li2CO3 possesses larger primary particle size compared with the LiNi0.5Mn1.5O4 synthesized from the (Ni0.25Mn0.75)2O3 and Li2CO3. Besides, the latter LiNi0.5Mn1.5O4 shows more excellent electrochemical properties, delivers an initial discharge capacity 136.3 mA?h/g at the rate of 1C in the voltage range of 3.0?4.9 V. Particularly, its capacity is still 126.5 mA?h/g after 100 cycles. Furthermore, the sample performs excellent rate capability, even at 5C, the discharge capacity still keeps 120.7 mA?h/g.