石油钻探技术
石油鑽探技術
석유찬탐기술
PETROLEUM DRILLING TECHNIQUES
2014年
2期
80-84
,共5页
汪晓静%孔祥明%曾敏%徐春虎%赵志恒
汪曉靜%孔祥明%曾敏%徐春虎%趙誌恆
왕효정%공상명%증민%서춘호%조지항
苯丙胶乳%胶乳水泥浆%水泥浆性能%实验室试验
苯丙膠乳%膠乳水泥漿%水泥漿性能%實驗室試驗
분병효유%효유수니장%수니장성능%실험실시험
styrene acrylic latex%cement slurry with latex%cement slurry performance%laboratory test
为提高苯丙胶乳的适用温度,满足高温固井的需求,以苯乙烯、丙烯酸丁酯、功能单体等为原料,合成了一种新型耐高温苯丙胶乳GR ,并进行了500 kg的放大生产。室内评价了GR苯丙胶乳水泥浆体系的高温降滤失性、流变性、防气窜性能、稳定性和综合性能,对比了GR小样产品与中试产品的性能,论述了苯丙胶乳GR的作用机理。结果表明:GR苯丙胶乳水泥浆的滤失量可以控制在50 mL以下,耐温能力达到150℃;GR苯丙胶乳水泥浆具有良好的流变性、直角稠化、防气窜性能以及稳定性等特点,另外中试生产的苯丙胶乳的性能与室内小样产品均保持一致。综合分析认为,GR苯丙胶乳水泥浆可以满足150℃以下高温固井的要求。
為提高苯丙膠乳的適用溫度,滿足高溫固井的需求,以苯乙烯、丙烯痠丁酯、功能單體等為原料,閤成瞭一種新型耐高溫苯丙膠乳GR ,併進行瞭500 kg的放大生產。室內評價瞭GR苯丙膠乳水泥漿體繫的高溫降濾失性、流變性、防氣竄性能、穩定性和綜閤性能,對比瞭GR小樣產品與中試產品的性能,論述瞭苯丙膠乳GR的作用機理。結果錶明:GR苯丙膠乳水泥漿的濾失量可以控製在50 mL以下,耐溫能力達到150℃;GR苯丙膠乳水泥漿具有良好的流變性、直角稠化、防氣竄性能以及穩定性等特點,另外中試生產的苯丙膠乳的性能與室內小樣產品均保持一緻。綜閤分析認為,GR苯丙膠乳水泥漿可以滿足150℃以下高溫固井的要求。
위제고분병효유적괄용온도,만족고온고정적수구,이분을희、병희산정지、공능단체등위원료,합성료일충신형내고온분병효유GR ,병진행료500 kg적방대생산。실내평개료GR분병효유수니장체계적고온강려실성、류변성、방기찬성능、은정성화종합성능,대비료GR소양산품여중시산품적성능,논술료분병효유GR적작용궤리。결과표명:GR분병효유수니장적려실량가이공제재50 mL이하,내온능력체도150℃;GR분병효유수니장구유량호적류변성、직각주화、방기찬성능이급은정성등특점,령외중시생산적분병효유적성능여실내소양산품균보지일치。종합분석인위,GR분병효유수니장가이만족150℃이하고온고정적요구。
In order to raise the applied temperature of the styrene acrylic latex and meet the needs of high-temperature cementing ,a new high temperature resistant styrene acrylic latex GR was synthesized from styrene ,butyl acrylate ,and functional monomer ,then 500 kg weight pilot product was produced .The properties(water-loss control property at high temperature ,rheology ,static gelling strength ,stability ,inte-grated engineering performances )of the cement slurry sample with styrene acrylic latex GR were evaluated then compared with that from pilot product .It shows that :fluid loss of the cement slurry with styrene a-crylic latex GR can be controlled under 50 mL ,w hile temperature tolerance is up to 150 ℃ ;It has good rhe-ology ,right-angle cementing ,good anti-channeling performance and stability ;and laboratory samples and pilot product have consistent performance .Comprehensive analysis show s that styrene acrylic latex GR can meet the requirements of cementing below 150 ℃ .