CAJ | 학술논문

热镀锌层质量及热镀锌过程中的锌耗成本与热镀锌的助镀工艺密切相关，通过对热镀锌助镀工艺的研究，阐述了热镀锌助镀作用机理，给出了钢铁制件热镀锌时助镀液的有效成分范围及工艺参数为氯化铵和氯化锌的总质量浓度、铵锌比、PH值、温度。并分析了助镀液浓度、成分配比、铁盐含量、除铁方法、PH值和温度等因素对热镀锌的影响。结果表明，要获得良好的镀锌质量及较低的生产成本，必须对热镀锌助镀液成分及工艺条件进行严格控制。
열도자층질량급열도자과정중적자모성본여열도자적조도공예밀절상관，통과대열도자조도공예적연구，천술료열도자조도작용궤리，급출료강철제건열도자시조도액적유효성분범위급공예삼수위록화안화록화자적총질량농도、안자비、PH치、온도。병분석료조도액농도、성분배비、철염함량、제철방법、PH치화온도등인소대열도자적영향。결과표명，요획득량호적도자질량급교저적생산성본，필수대열도자조도액성분급공예조건진행엄격공제。
-The-quality-of-hot-dip-galvanized-coating-and-the-cost-of-zinc-consumption-during-the-hot-galvanizing,-are-closely-connected-with-the-galvanizing-fluxing-technology.-Based-on-the-research-about-the-galvanizing-fluxing-technology,-the- present-paper-has-explained-the-mechanism-of-hot-galvanizing-fluxing,-indicted-the-ef ective-composition-and-technological-parameters-of-the-steelwork-galvanizing,-which-including-the-total-mas -concentration,-An/Zn-ratio,-pH,temperature-of-ammonium- chloride-and-zinc-chloride.-Moreover,-this-paper-also-has-analyzed-the-ef ect-on-the-hot-galvanizing-by-concentration-of-flux,-composition-proportion,-molysite-content,-method-of-removing-molysite,-pH-and-temperature,-etc.-The-research-results-show-that,- we- must-strictly-control -the-composition-of-flux-and-technology-conditio.,if-we-expect-to-obtain-the-good-quality-as-wel -as-the-low-output-cost-of-hot-dip-galvanized-coating.