印制电路信息
印製電路信息
인제전로신식
PRINTED CIRCUIT INFORMATION
2014年
4期
78-81
,共4页
Tg%ΔTg%热分析%DSC%TMA%DMA
Tg%ΔTg%熱分析%DSC%TMA%DMA
Tg%ΔTg%열분석%DSC%TMA%DMA
Tg%Thermal Analysis%DSC%TMA%DMA
测试PCB板材的Tg以及ΔTg的方法主要有DSC(差示扫描量热法)、TMA(静态热机械分析仪)及DMA(动态热机械分析仪),IPC-TM-650中对DSC、TMA及DMA的测试方法均有介绍,但是相关的IPC标准中并没有对TMA及DMA测试结果的评价机制,目前只有对于DSC评估标准有明确的要求。DSC、TMA及DMA各自根据不同的原理测量玻璃化转变温度,因此其测试结果也具有一些差别。文章通过实验对比统计的方法测试得到TMA及DMA与DSC之间测试Tg及ΔTg存在的差异,分析了其中存在差异的原因。为同行业使用DSC、TMA及DMA三种热分析设备测试Tg及ΔTg的评估提供一些参考。
測試PCB闆材的Tg以及ΔTg的方法主要有DSC(差示掃描量熱法)、TMA(靜態熱機械分析儀)及DMA(動態熱機械分析儀),IPC-TM-650中對DSC、TMA及DMA的測試方法均有介紹,但是相關的IPC標準中併沒有對TMA及DMA測試結果的評價機製,目前隻有對于DSC評估標準有明確的要求。DSC、TMA及DMA各自根據不同的原理測量玻璃化轉變溫度,因此其測試結果也具有一些差彆。文章通過實驗對比統計的方法測試得到TMA及DMA與DSC之間測試Tg及ΔTg存在的差異,分析瞭其中存在差異的原因。為同行業使用DSC、TMA及DMA三種熱分析設備測試Tg及ΔTg的評估提供一些參攷。
측시PCB판재적Tg이급ΔTg적방법주요유DSC(차시소묘량열법)、TMA(정태열궤계분석의)급DMA(동태열궤계분석의),IPC-TM-650중대DSC、TMA급DMA적측시방법균유개소,단시상관적IPC표준중병몰유대TMA급DMA측시결과적평개궤제,목전지유대우DSC평고표준유명학적요구。DSC、TMA급DMA각자근거불동적원리측량파리화전변온도,인차기측시결과야구유일사차별。문장통과실험대비통계적방법측시득도TMA급DMA여DSC지간측시Tg급ΔTg존재적차이,분석료기중존재차이적원인。위동행업사용DSC、TMA급DMA삼충열분석설비측시Tg급ΔTg적평고제공일사삼고。
The glass transition temperature is a very important parameter PCB material, the degree of curing the sheet pressing the two tests can be the difference between the glass transition temperature to be measured. Test current commonly used glass transition temperature apparatus has a differential scanning calorimetry (DSC), thermal mechanical analyzer static (TMA) and dynamic mechanical analysis (DMA), and the instrument is based on three different principles measurement of glass transition temperature. This paper compares statistical method to test and get the TMA and DMA Tg DSC tests andΔTg between existing differences, analyzes reasons for the differences which exist. For the same industry using DSC, TMA and DMA Tg three kinds of thermal analysis equipment testing and evaluationΔTg provide some reference.