石油化工腐蚀与防护
石油化工腐蝕與防護
석유화공부식여방호
PETROCHEMICAL CORROSION AND PROTECTION
2013年
3期
18-22
,共5页
减压塔%腐蚀%环烷酸
減壓塔%腐蝕%環烷痠
감압탑%부식%배완산
通过检测、检查和分析减压塔腐蚀减薄的状况,发现减压塔出现大范围的腐蚀减薄现象,原始壁厚为20 mm的筒体,测厚最低值为5.8 mm.分析得出减压塔出现严重腐蚀减薄的主要原因是环烷酸腐蚀、筒体材质偏低、局部流速过快等.为此对减压塔腐蚀现象进行了分析并作出了安全评估,评估表明该塔存在腐蚀穿孔、轴向失稳的可能性.根据评估结合具体生产实际,制定并实施了减压塔临时贴补加强和进行简体更换的长期防范整治措施.
通過檢測、檢查和分析減壓塔腐蝕減薄的狀況,髮現減壓塔齣現大範圍的腐蝕減薄現象,原始壁厚為20 mm的筒體,測厚最低值為5.8 mm.分析得齣減壓塔齣現嚴重腐蝕減薄的主要原因是環烷痠腐蝕、筒體材質偏低、跼部流速過快等.為此對減壓塔腐蝕現象進行瞭分析併作齣瞭安全評估,評估錶明該塔存在腐蝕穿孔、軸嚮失穩的可能性.根據評估結閤具體生產實際,製定併實施瞭減壓塔臨時貼補加彊和進行簡體更換的長期防範整治措施.
통과검측、검사화분석감압탑부식감박적상황,발현감압탑출현대범위적부식감박현상,원시벽후위20 mm적통체,측후최저치위5.8 mm.분석득출감압탑출현엄중부식감박적주요원인시배완산부식、통체재질편저、국부류속과쾌등.위차대감압탑부식현상진행료분석병작출료안전평고,평고표명해탑존재부식천공、축향실은적가능성.근거평고결합구체생산실제,제정병실시료감압탑림시첩보가강화진행간체경환적장기방범정치조시.