橡胶工业
橡膠工業
상효공업
CHINA RUBBER INDUSTRY
2013年
6期
351-356
,共6页
两亲性大分子单体%改性%吸水树脂%吸水膨胀橡胶
兩親性大分子單體%改性%吸水樹脂%吸水膨脹橡膠
량친성대분자단체%개성%흡수수지%흡수팽창상효
amphoteric macromonomer%modification%water-absorbable resin%water-swellable rubber
对两亲性大分子单体香茅醇马来酸单酯羧酸铵(CMPA)的合成及其在吸水膨胀橡胶(WSR)中的应用进行研究.结果表明:利用CMPA通过反相乳液聚合法制备的改性吸水树脂平均粒径为0.5 μm,粒径分布比较均匀,且具有较好的热稳定性;改性吸水树脂在WSR中的分散性较好,相容性提高,改性吸水树脂的加入对橡胶的硫化过程有促进作用,对WSR的硬度基本无影响,可提高拉伸强度、拉断伸长率和撕裂强度;当CMPA质量占吸水树脂质量的5%时,WSR的吸水膨胀率为367%,且综合物理性能较好.
對兩親性大分子單體香茅醇馬來痠單酯羧痠銨(CMPA)的閤成及其在吸水膨脹橡膠(WSR)中的應用進行研究.結果錶明:利用CMPA通過反相乳液聚閤法製備的改性吸水樹脂平均粒徑為0.5 μm,粒徑分佈比較均勻,且具有較好的熱穩定性;改性吸水樹脂在WSR中的分散性較好,相容性提高,改性吸水樹脂的加入對橡膠的硫化過程有促進作用,對WSR的硬度基本無影響,可提高拉伸彊度、拉斷伸長率和撕裂彊度;噹CMPA質量佔吸水樹脂質量的5%時,WSR的吸水膨脹率為367%,且綜閤物理性能較好.
대량친성대분자단체향모순마래산단지최산안(CMPA)적합성급기재흡수팽창상효(WSR)중적응용진행연구.결과표명:이용CMPA통과반상유액취합법제비적개성흡수수지평균립경위0.5 μm,립경분포비교균균,차구유교호적열은정성;개성흡수수지재WSR중적분산성교호,상용성제고,개성흡수수지적가입대상효적류화과정유촉진작용,대WSR적경도기본무영향,가제고랍신강도、랍단신장솔화시렬강도;당CMPA질량점흡수수지질량적5%시,WSR적흡수팽창솔위367%,차종합물이성능교호.