计算机工程与应用
計算機工程與應用
계산궤공정여응용
COMPUTER ENGINEERING AND APPLICATIONS
2013年
16期
248-251
,共4页
吴乐鹏%黄纯%黄娟%郑健
吳樂鵬%黃純%黃娟%鄭健
오악붕%황순%황연%정건
小电流接地系统%单相接地故障%改进能量法
小電流接地繫統%單相接地故障%改進能量法
소전류접지계통%단상접지고장%개진능량법
small current grounding system%single-phase-to-ground fault%improving energy
鉴于消弧线圈的作用和主导特征频带的差异,为解决谐振接地电网单相接地故障选线不准确的问题,在详细分析谐振电网暂态零序电流特征后,提出了一种新的改进能量的选线方法。将各馈线暂态零序电流导入MATLAB,取故障后零序电流1/4工频周期短窗数据计算短窗能量,以馈线长度为基准,对其进行改进计算,比较各馈线改进后能量进行选线。采用EMTP进行大量仿真,结果表明该方法具有较高的选线裕度,不受故障合闸角、故障距离、过渡电阻、电弧及系统运行方式等因素的影响,与现有的经典能量选线法相比更加快速和准确。
鑒于消弧線圈的作用和主導特徵頻帶的差異,為解決諧振接地電網單相接地故障選線不準確的問題,在詳細分析諧振電網暫態零序電流特徵後,提齣瞭一種新的改進能量的選線方法。將各饋線暫態零序電流導入MATLAB,取故障後零序電流1/4工頻週期短窗數據計算短窗能量,以饋線長度為基準,對其進行改進計算,比較各饋線改進後能量進行選線。採用EMTP進行大量倣真,結果錶明該方法具有較高的選線裕度,不受故障閤閘角、故障距離、過渡電阻、電弧及繫統運行方式等因素的影響,與現有的經典能量選線法相比更加快速和準確。
감우소호선권적작용화주도특정빈대적차이,위해결해진접지전망단상접지고장선선불준학적문제,재상세분석해진전망잠태령서전류특정후,제출료일충신적개진능량적선선방법。장각궤선잠태령서전류도입MATLAB,취고장후령서전류1/4공빈주기단창수거계산단창능량,이궤선장도위기준,대기진행개진계산,비교각궤선개진후능량진행선선。채용EMTP진행대량방진,결과표명해방법구유교고적선선유도,불수고장합갑각、고장거리、과도전조、전호급계통운행방식등인소적영향,여현유적경전능량선선법상비경가쾌속화준학。
In view of arc suppression coil effect and dominant characteristic band difference, to solve alignment inaccuration problem of single-phase ground fault in resonant grounding power distribution system, with detail analysis of transient zero-se-quence current in resonant grounding power distribution system characteristics, improved energy to alignment as a new method is proposed. Using transient zero-sequence current of feeders into MATLAB, and 1/4 of frequency cycle short window data is used to calculate short window energy. Then the short window energy is improved based on feeders’length. After comparing the improved energy by feeders, alignment is determined with principle of maximum wavelet packet energy of the improved fault line. A large number EMTP simulation results show that the method has a high detect line margin and is not affected by fault closing angle, fault distance, transition resistance, arc, system operating mode and other factors. Compared to classical ener-gy alignment method, it is more rapid and accurate.