高等学校化学学报
高等學校化學學報
고등학교화학학보
CHEMICAL JOURNAL OF CHINESE UNIVERSITIES
2013年
4期
984-991
,共8页
王鑫众%刘建国%唐宇锋%王宇%章培标%陈学思
王鑫衆%劉建國%唐宇鋒%王宇%章培標%陳學思
왕흠음%류건국%당우봉%왕우%장배표%진학사
膜乳化%聚乳酸%二甲基砜%微球%生物活性
膜乳化%聚乳痠%二甲基砜%微毬%生物活性
막유화%취유산%이갑기풍%미구%생물활성
采用膜乳化-液中干燥法制备出担载二甲基砜(MSM)的聚乳酸(PLA)微球(PLA/MSM),并研究了膜孔径、搅拌转速和MSM浓度对载药微球形貌、尺寸、载药量、体外释放及细胞活性的影响;采用场发射环境扫描电子显微镜(ESEM)观察微球形貌、尺寸及分布,用等离子体发射光谱(ICP-AES)法检测PLA/MSM微球载药量、包封率及体外释放,采用ESEM观察微球内部结构,并通过体外细胞培养和噻唑蓝(MTT)法检测MC-3T3-E1细胞的增殖能力.研究结果表明,膜乳化法制备的载药微球规整,呈典型的圆球状,表面光滑,内部有多孔结构.当膜孔径为5.1μm且搅拌转速为500 r/min时,PLA/MSM微球大小更为均一;当体系中MSM质量分数为8.6%时,载药量可达到77.43%.随着膜孔径减小及药物浓度的增加,体外释放速率加快,但初期均无明显的突释现象,约10 d后累积释放量达到89.2%.细胞实验结果显示,在膜孔径为5.1 μm且MSM质量分数为8.6%的条件下,制备的载药微球在细胞培养7d时表现出明显的促增殖作用.
採用膜乳化-液中榦燥法製備齣擔載二甲基砜(MSM)的聚乳痠(PLA)微毬(PLA/MSM),併研究瞭膜孔徑、攪拌轉速和MSM濃度對載藥微毬形貌、呎吋、載藥量、體外釋放及細胞活性的影響;採用場髮射環境掃描電子顯微鏡(ESEM)觀察微毬形貌、呎吋及分佈,用等離子體髮射光譜(ICP-AES)法檢測PLA/MSM微毬載藥量、包封率及體外釋放,採用ESEM觀察微毬內部結構,併通過體外細胞培養和噻唑藍(MTT)法檢測MC-3T3-E1細胞的增殖能力.研究結果錶明,膜乳化法製備的載藥微毬規整,呈典型的圓毬狀,錶麵光滑,內部有多孔結構.噹膜孔徑為5.1μm且攪拌轉速為500 r/min時,PLA/MSM微毬大小更為均一;噹體繫中MSM質量分數為8.6%時,載藥量可達到77.43%.隨著膜孔徑減小及藥物濃度的增加,體外釋放速率加快,但初期均無明顯的突釋現象,約10 d後纍積釋放量達到89.2%.細胞實驗結果顯示,在膜孔徑為5.1 μm且MSM質量分數為8.6%的條件下,製備的載藥微毬在細胞培養7d時錶現齣明顯的促增殖作用.
채용막유화-액중간조법제비출담재이갑기풍(MSM)적취유산(PLA)미구(PLA/MSM),병연구료막공경、교반전속화MSM농도대재약미구형모、척촌、재약량、체외석방급세포활성적영향;채용장발사배경소묘전자현미경(ESEM)관찰미구형모、척촌급분포,용등리자체발사광보(ICP-AES)법검측PLA/MSM미구재약량、포봉솔급체외석방,채용ESEM관찰미구내부결구,병통과체외세포배양화새서람(MTT)법검측MC-3T3-E1세포적증식능력.연구결과표명,막유화법제비적재약미구규정,정전형적원구상,표면광활,내부유다공결구.당막공경위5.1μm차교반전속위500 r/min시,PLA/MSM미구대소경위균일;당체계중MSM질량분수위8.6%시,재약량가체도77.43%.수착막공경감소급약물농도적증가,체외석방속솔가쾌,단초기균무명현적돌석현상,약10 d후루적석방량체도89.2%.세포실험결과현시,재막공경위5.1 μm차MSM질량분수위8.6%적조건하,제비적재약미구재세포배양7d시표현출명현적촉증식작용.