装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2013年
1期
22-25
,共4页
陈珊%李国明%常万顺%陈学群
陳珊%李國明%常萬順%陳學群
진산%리국명%상만순%진학군
5083铝合金%点蚀%动电位和循环极化%表面状态%pH值
5083鋁閤金%點蝕%動電位和循環極化%錶麵狀態%pH值
5083려합금%점식%동전위화순배겁화%표면상태%pH치
AA5083%pitting corrosion%potentiodynamic and cyclic polarization%surface state%pH value
采用动电位扫描及循环伏安试验方法,研究了工作电极表面状态、Cl-浓度、pH值等因素对5083铝合金在质量分数为3.5%的NaCl溶液中电化学性能的影响.研究结果表明,试样表面进行抛光后,点蚀电位变正,点蚀保护电位正移.随着Cl-浓度的降低,点蚀电位巴明显正移;当Cl-浓度超过1%(质量分数)后,Cl-浓度对Eb的影响则不明显.溶液的pH值及其它阴离子的添加均会对5083铝合金点蚀电位及保护电位产生影响.
採用動電位掃描及循環伏安試驗方法,研究瞭工作電極錶麵狀態、Cl-濃度、pH值等因素對5083鋁閤金在質量分數為3.5%的NaCl溶液中電化學性能的影響.研究結果錶明,試樣錶麵進行拋光後,點蝕電位變正,點蝕保護電位正移.隨著Cl-濃度的降低,點蝕電位巴明顯正移;噹Cl-濃度超過1%(質量分數)後,Cl-濃度對Eb的影響則不明顯.溶液的pH值及其它陰離子的添加均會對5083鋁閤金點蝕電位及保護電位產生影響.
채용동전위소묘급순배복안시험방법,연구료공작전겁표면상태、Cl-농도、pH치등인소대5083려합금재질량분수위3.5%적NaCl용액중전화학성능적영향.연구결과표명,시양표면진행포광후,점식전위변정,점식보호전위정이.수착Cl-농도적강저,점식전위파명현정이;당Cl-농도초과1%(질량분수)후,Cl-농도대Eb적영향칙불명현.용액적pH치급기타음리자적첨가균회대5083려합금점식전위급보호전위산생영향.