中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2013年
7期
922-925,931
,共5页
弯艳玲%丛茜%齐迎春%齐欣
彎豔玲%叢茜%齊迎春%齊訢
만염령%총천%제영춘%제흔
仿生%凹槽形%减阻%注射器针头
倣生%凹槽形%減阻%註射器針頭
방생%요조형%감조%주사기침두
从仿生学角度出发,依据蚊子口器的形态结构,设计了凹槽形仿生结构针头.采用激光表面毛化处理机加工出凹槽形仿生针头,对仿生针头的穿刺阻力进行了测定,并对其刺入机理进行了分析.试验表明:凹槽形仿生针头较光滑针头具有减阻效果,且减阻效果随凹槽数量的增加而增大,凹槽宽度对针头的减阻效果呈先增后减的趋势;针头与刺入介质接触面积越小,针头减阻效果越好;凹槽结构在刺入过程中产生涡流效应,使滑动摩擦变为滚动摩擦,减小了摩擦阻力.
從倣生學角度齣髮,依據蚊子口器的形態結構,設計瞭凹槽形倣生結構針頭.採用激光錶麵毛化處理機加工齣凹槽形倣生針頭,對倣生針頭的穿刺阻力進行瞭測定,併對其刺入機理進行瞭分析.試驗錶明:凹槽形倣生針頭較光滑針頭具有減阻效果,且減阻效果隨凹槽數量的增加而增大,凹槽寬度對針頭的減阻效果呈先增後減的趨勢;針頭與刺入介質接觸麵積越小,針頭減阻效果越好;凹槽結構在刺入過程中產生渦流效應,使滑動摩抆變為滾動摩抆,減小瞭摩抆阻力.
종방생학각도출발,의거문자구기적형태결구,설계료요조형방생결구침두.채용격광표면모화처리궤가공출요조형방생침두,대방생침두적천자조력진행료측정,병대기자입궤리진행료분석.시험표명:요조형방생침두교광활침두구유감조효과,차감조효과수요조수량적증가이증대,요조관도대침두적감조효과정선증후감적추세;침두여자입개질접촉면적월소,침두감조효과월호;요조결구재자입과정중산생와류효응,사활동마찰변위곤동마찰,감소료마찰조력.