广州化工
廣州化工
엄주화공
GUANGZHOU CHEMICAL INDUSTRY AND TECHNOLOGY
2013年
6期
1-4,7
,共5页
康海全%崔迟%陈锡周%唐建华
康海全%崔遲%陳錫週%唐建華
강해전%최지%진석주%당건화
聚磷酸铵%核壳结构复合粒子%硬质聚氨酯泡沫%阻燃性能%动态力学性能
聚燐痠銨%覈殼結構複閤粒子%硬質聚氨酯泡沫%阻燃性能%動態力學性能
취린산안%핵각결구복합입자%경질취안지포말%조연성능%동태역학성능
成功制备了以聚磷酸铵(APP)为核,以聚甲基丙烯酸缩水甘油酯(PGMA)为壳的核-壳结构复合粒子(MCAPP),并研究了其在硬质聚氨酯泡沫材料(RPUF)的阻燃应用.研究发现MCAPP在80℃溶解度从4.09g降至0.93 g,有效解决APP吸湿性难题.当添加MCAPP为20%时,其限制氧指数为31%,通过UL-94测试V-0,并且在湿热的环境中其良好的阻燃性能可保持.压缩性能测试表明,RPUFMCAPP复合材料的压缩强度从1.6 MPa增加到2.0 MPa,压缩模量由32.3 MPa增至55.8 MPa.通过热失重测试(Tg)、扫描电镜分析(SEM)、极限氧指数测试(LOI)、UL-94测试、动态力学性能测试(DMA)等表征复合材料的各项性能.
成功製備瞭以聚燐痠銨(APP)為覈,以聚甲基丙烯痠縮水甘油酯(PGMA)為殼的覈-殼結構複閤粒子(MCAPP),併研究瞭其在硬質聚氨酯泡沫材料(RPUF)的阻燃應用.研究髮現MCAPP在80℃溶解度從4.09g降至0.93 g,有效解決APP吸濕性難題.噹添加MCAPP為20%時,其限製氧指數為31%,通過UL-94測試V-0,併且在濕熱的環境中其良好的阻燃性能可保持.壓縮性能測試錶明,RPUFMCAPP複閤材料的壓縮彊度從1.6 MPa增加到2.0 MPa,壓縮模量由32.3 MPa增至55.8 MPa.通過熱失重測試(Tg)、掃描電鏡分析(SEM)、極限氧指數測試(LOI)、UL-94測試、動態力學性能測試(DMA)等錶徵複閤材料的各項性能.
성공제비료이취린산안(APP)위핵,이취갑기병희산축수감유지(PGMA)위각적핵-각결구복합입자(MCAPP),병연구료기재경질취안지포말재료(RPUF)적조연응용.연구발현MCAPP재80℃용해도종4.09g강지0.93 g,유효해결APP흡습성난제.당첨가MCAPP위20%시,기한제양지수위31%,통과UL-94측시V-0,병차재습열적배경중기량호적조연성능가보지.압축성능측시표명,RPUFMCAPP복합재료적압축강도종1.6 MPa증가도2.0 MPa,압축모량유32.3 MPa증지55.8 MPa.통과열실중측시(Tg)、소묘전경분석(SEM)、겁한양지수측시(LOI)、UL-94측시、동태역학성능측시(DMA)등표정복합재료적각항성능.