冶金动力
冶金動力
야금동력
METALLURGICAL POWER
2014年
7期
13-15,18
,共4页
蒸发冷却塔%喷雾降温%设计
蒸髮冷卻塔%噴霧降溫%設計
증발냉각탑%분무강온%설계
evaporative cooling tower%spray cooling%design
热态上料高炉半净煤气的温度为600～700℃，需将其温度降低至250℃以下，以满足布袋除尘系统对煤气温度的要求。高炉煤气蒸发冷却塔作为干式冷却设备，它通过双流喷嘴将冷却水雾化喷入冷却塔内，利用水的汽化潜热将煤气温度迅速降低，同时也降低了煤气的含尘浓度。介绍了蒸发冷却塔原理及其系统组成，就某个项目做出蒸发冷却塔设计计算，并得出相应结论。
熱態上料高爐半淨煤氣的溫度為600～700℃，需將其溫度降低至250℃以下，以滿足佈袋除塵繫統對煤氣溫度的要求。高爐煤氣蒸髮冷卻塔作為榦式冷卻設備，它通過雙流噴嘴將冷卻水霧化噴入冷卻塔內，利用水的汽化潛熱將煤氣溫度迅速降低，同時也降低瞭煤氣的含塵濃度。介紹瞭蒸髮冷卻塔原理及其繫統組成，就某箇項目做齣蒸髮冷卻塔設計計算，併得齣相應結論。
열태상료고로반정매기적온도위600～700℃，수장기온도강저지250℃이하，이만족포대제진계통대매기온도적요구。고로매기증발냉각탑작위간식냉각설비，타통과쌍류분취장냉각수무화분입냉각탑내，이용수적기화잠열장매기온도신속강저，동시야강저료매기적함진농도。개소료증발냉각탑원리급기계통조성，취모개항목주출증발냉각탑설계계산，병득출상응결론。
The temperature of semi-purified hot fed BFG is 600~700 ℃, which should be lowered to below 250 ℃ to meet the requirement of dust bag filters. As a dry cooling de-vice, blast furnace gas evaporative cooling tower sprays atomized cooling water into the cooling tower through double-flow nozzle, to rapidly reduce the temperature of gas by the latent heat of water vaporization and at the same tine reduce the dust concentration in gas. This paper introduces the principle and system composition of evaporative cooling tower, carries out de-signing calculation for an evaporative cooling tower project and draw up relevant conclusions.
