CAJ | 학술논문

为了保证液粘软起动装置稳定可靠工作，必须将摩擦片温升控制在允许的范围内，防止摩擦片温升过高变形失效。通过分析推导摩擦片在有滑差情况下产生的热量，减去润滑油能带走的热量，得出摩擦片温升计算公式。通过检测润滑油进、出液粘软起动装置的温度和液粘软起动装置的输出轴转速，利用本文推导的公式可以得出摩擦片的温升。最后用实例进行了仿真分析，验证了摩擦片温升公式的正确性。
위료보증액점연기동장치은정가고공작，필수장마찰편온승공제재윤허적범위내，방지마찰편온승과고변형실효。통과분석추도마찰편재유활차정황하산생적열량，감거윤활유능대주적열량，득출마찰편온승계산공식。통과검측윤활유진、출액점연기동장치적온도화액점연기동장치적수출축전속，이용본문추도적공식가이득출마찰편적온승。최후용실례진행료방진분석，험증료마찰편온승공식적정학성。
To ensure steady and reliable operation of the hydro-viscous soft start device,it's required to limit temper-ature rise of the friction plate within the allowable range to avoid deformation and failure of the friction plate by too high temperature rise.The temperature rise equation is figured out by the heat generated when the friction plate is under slip fre-quency condition minus the heat taken by the grease.By detecting the temperatures when the grease in and out of the hydro-viscous soft start device and the rotating speed of the output shaft of the device,the temperature rise can be solved by the above-mentioned equation.The simulation analysis is finally performed by examples to verify correctness of the temperature rise equation.