航空制造技术
航空製造技術
항공제조기술
AERONAUTICAL MANUFACTURING TECHNOLOGY
2014年
9期
64-65
,共2页
激光耦合装置%大功率激光%激光焊接
激光耦閤裝置%大功率激光%激光銲接
격광우합장치%대공솔격광%격광한접
Laser coupling equipment%High-pow-er laser%Laser welding
研制了一套YAG激光耦合装置,利用非相干合成技术将三束激光合成为一束大功率激光,再通过耦合技术经由一根光纤输出。从功率损耗、光束质量及焊接性能三个方面对耦合装置的性能进行分析。结果表明,耦合装置能量损失小于10%;耦合后光束能量分布均匀;与单束激光源相比,激光器的输出功率得到大幅度增加,激光焊接厚度得到增大,焊接效率得到提高。
研製瞭一套YAG激光耦閤裝置,利用非相榦閤成技術將三束激光閤成為一束大功率激光,再通過耦閤技術經由一根光纖輸齣。從功率損耗、光束質量及銲接性能三箇方麵對耦閤裝置的性能進行分析。結果錶明,耦閤裝置能量損失小于10%;耦閤後光束能量分佈均勻;與單束激光源相比,激光器的輸齣功率得到大幅度增加,激光銲接厚度得到增大,銲接效率得到提高。
연제료일투YAG격광우합장치,이용비상간합성기술장삼속격광합성위일속대공솔격광,재통과우합기술경유일근광섬수출。종공솔손모、광속질량급한접성능삼개방면대우합장치적성능진행분석。결과표명,우합장치능량손실소우10%;우합후광속능량분포균균;여단속격광원상비,격광기적수출공솔득도대폭도증가,격광한접후도득도증대,한접효솔득도제고。
A coupling equipment for YAG la-sers has been designed. By incoherent combing technology, three laser beams is combined to a higher power laser source delivered by a ifber output. The performance loss of power, beam quality and welding properties of the coupling device had been analyzed. The results show that the coupling device energy loss is less than 10% . The coupling laser beam energy distribution is symmetrical. Comparing with the single beam laser source, not only the output power of the laser is greatly increased, but also the thickness of metal welded by laser and the welding efifciency are increased.