CAJ | 학술논문

推弹机的作用是把炮弹推入炮膛，推弹机出现故障将直接导致自动装填失败。通过从产品设计和工艺制造等方面对推弹机的故障进行详细分析，研究推弹机零部件的结构和工艺制造方法、精度对推弹机正常工作的影响程度，并提出解决这些故障的具体措施。该分析及其对策不仅提高了装备的可靠性和稳定性，降低了制造成本和维护保养费，也可为车载武器系统的总体设计和部件设计提供技术支持和应用依据。
추탄궤적작용시파포탄추입포당，추탄궤출현고장장직접도치자동장전실패。통과종산품설계화공예제조등방면대추탄궤적고장진행상세분석，연구추탄궤령부건적결구화공예제조방법、정도대추탄궤정상공작적영향정도，병제출해결저사고장적구체조시。해분석급기대책불부제고료장비적가고성화은정성，강저료제조성본화유호보양비，야가위차재무기계통적총체설계화부건설계제공기술지지화응용의거。
In certain equipment,the rammer was used to ram the round into the bore of the gun,and the malfunctions of the rammer will result in the failure of autoloading.The malfunctions of the rammer were analyzed in detail according to the product design and manufacturing process etc.,and the main reasons of the malfunctions were found out.Structure and technology manufacturing methods of the rammer parts, influence of the accuracy on rammer proper functioning were researched,and the definite measures to solve these malfunctions were proposed.The analysis and countermeasures can not only increase the relia-bility and stability of the equipment,decrease the manufacturing costs and maintaining fee,but also pro-vide the technical support and application basis for the overall design and parts design of the vehicle-mounted weapon systems.