计量学报
計量學報
계량학보
ACTA METROLOGICA SINICA
2014年
4期
360-362
,共3页
计量学%疲劳试验机%动态力测试%修正因子
計量學%疲勞試驗機%動態力測試%脩正因子
계량학%피로시험궤%동태력측시%수정인자
Metrology%Fatigue testing machine%Dynamic force test%Correction factor
疲劳试验机的动态力修正量与试验机参振质量、刚度及其分布、试验机的传感器安装位置有关。通过对传感器安装在2种不同位置的疲劳试验机力学模型的动态力分析,给出试验机使用时动态力的近似修正公式。通过动态力与参振系统质量分布的分析,结合频率在1000 Hz 以下动态法与静态法力值校准的实验数据,认为疲劳试验机检定时采用静态法力值校准较动态法力值校准更为合理。
疲勞試驗機的動態力脩正量與試驗機參振質量、剛度及其分佈、試驗機的傳感器安裝位置有關。通過對傳感器安裝在2種不同位置的疲勞試驗機力學模型的動態力分析,給齣試驗機使用時動態力的近似脩正公式。通過動態力與參振繫統質量分佈的分析,結閤頻率在1000 Hz 以下動態法與靜態法力值校準的實驗數據,認為疲勞試驗機檢定時採用靜態法力值校準較動態法力值校準更為閤理。
피로시험궤적동태력수정량여시험궤삼진질량、강도급기분포、시험궤적전감기안장위치유관。통과대전감기안장재2충불동위치적피로시험궤역학모형적동태력분석,급출시험궤사용시동태력적근사수정공식。통과동태력여삼진계통질량분포적분석,결합빈솔재1000 Hz 이하동태법여정태법력치교준적실험수거,인위피로시험궤검정시채용정태법력치교준교동태법력치교준경위합리。
Dynamic force correction of the fatigue testing machine is related to the position of load cell,the mass, stiffness and their distribution of the vibration system. A approximate correction formula is given by the analysis of the dynamic forces to the fatigue testing machines of load cell mounted in two different positions. A view point is proposed, which static calibration is more reasonable than dynamic calibration in fatigue testing machine test by analysis of the mass distribution of the dynamic forces part of the vibration system,combined with experimental force data using dynamic and static calibration method while frequencies below 1 000 Hz.