CAJ | 학술논문

针对仰角式油水分离器结构进行了初步设计。为了提高分离器油水分离效率，引入正交试验法对其结构参数进行改变和重新配置，设计了8因素5水平的正交方案，得到50种不同的结构组合模型。采用Fluent 12．0软件对50组模型进行数值模拟，选取其中的25组进行直观分析，得到最优方案A ；通过数值计算数据的极差分析以及结构参数对油水分离效率的影响分析，选取各因素平均油水分离效率最高的水平组合，得出最优方案B；将A、B两方案进行比较分析，最终确定仰角式油水分离器的最优结构参数组合为B方案。采用相同的数值模拟方法，得出优化后的分离效率比优化前提高4．972％，表明正交试验法在该型分离器结构参数的优化方面具有一定的工程实践意义。
침대앙각식유수분리기결구진행료초보설계。위료제고분리기유수분리효솔，인입정교시험법대기결구삼수진행개변화중신배치，설계료8인소5수평적정교방안，득도50충불동적결구조합모형。채용Fluent 12．0연건대50조모형진행수치모의，선취기중적25조진행직관분석，득도최우방안A ；통과수치계산수거적겁차분석이급결구삼수대유수분리효솔적영향분석，선취각인소평균유수분리효솔최고적수평조합，득출최우방안B；장A、B량방안진행비교분석，최종학정앙각식유수분리기적최우결구삼수조합위B방안。채용상동적수치모의방법，득출우화후적분리효솔비우화전제고4．972％，표명정교시험법재해형분리기결구삼수적우화방면구유일정적공정실천의의。
T he incline d oil-water separator is a new efficient oil-water separation equipment and the structure of which is designed preliminarily .In order to improve the oil-water separating efficiency ,orthogonal design is introduced to optimize the structural parameters .An orthogonal scheme with 8 factors and 5 levels is designed to get 50 different structure models .Fluent 12 .0 software was used to simulate the 50 models and 25 schemes of them were selected for visual a-nalysis ,as a result ,the scheme A was determined as an optimal scheme .By the range analysis of numerical data and the influence analysis of structure parameters on the impact of oil-water sepa-ration efficiency ,the highest levels of the average oil-water separation efficiency were combined to get an optimal plan B .After comparing A with B ,it showed clearly that optimal parameters of the inclined oil-water separator was plan B .By simulating flow field with the same method ,it was found that the optimized separation efficiency increased by 4 .972% ,which showed that or-thogonal design in optimizing structure parameters of the separators had some practical signifi-cance .