四川电力技术
四川電力技術
사천전력기술
SICHUAN ELECTRIC POWER TECHNOLOGY
2014年
3期
14-18,52
,共6页
次同步振荡%静止同步补偿器%次同步阻尼控制器
次同步振盪%靜止同步補償器%次同步阻尼控製器
차동보진탕%정지동보보상기%차동보조니공제기
synchronous oscillation%static synchronous compensator%synchronous damping controller
电力系统输电过程中有一定概率产生次同步振荡(subsynchronous oscillation ,SSO),这种振荡极易造成汽轮发电机组的大轴损毁,准确分析系统的次同步振荡特性对其防止和抑制有重要意义。研究了静止同步补偿器( STAT-COM)的基本结构以及抑制SSO的基本方法,根据不同滤波器设计对次同步阻尼控制器的抑制效果不同,设计了3种次同步阻尼控制器。其中,提出一种新的控制器设计方法,利用该方法设计了窄带通次同步阻尼控制器;最后基于IEEE第一谐振模型,采用PSCAD/EMTDC电磁暂态仿真软件以及数值计算软件MATLAB,仿真验证3种不同控制器的有效性。
電力繫統輸電過程中有一定概率產生次同步振盪(subsynchronous oscillation ,SSO),這種振盪極易造成汽輪髮電機組的大軸損燬,準確分析繫統的次同步振盪特性對其防止和抑製有重要意義。研究瞭靜止同步補償器( STAT-COM)的基本結構以及抑製SSO的基本方法,根據不同濾波器設計對次同步阻尼控製器的抑製效果不同,設計瞭3種次同步阻尼控製器。其中,提齣一種新的控製器設計方法,利用該方法設計瞭窄帶通次同步阻尼控製器;最後基于IEEE第一諧振模型,採用PSCAD/EMTDC電磁暫態倣真軟件以及數值計算軟件MATLAB,倣真驗證3種不同控製器的有效性。
전력계통수전과정중유일정개솔산생차동보진탕(subsynchronous oscillation ,SSO),저충진탕겁역조성기륜발전궤조적대축손훼,준학분석계통적차동보진탕특성대기방지화억제유중요의의。연구료정지동보보상기( STAT-COM)적기본결구이급억제SSO적기본방법,근거불동려파기설계대차동보조니공제기적억제효과불동,설계료3충차동보조니공제기。기중,제출일충신적공제기설계방법,이용해방법설계료착대통차동보조니공제기;최후기우IEEE제일해진모형,채용PSCAD/EMTDC전자잠태방진연건이급수치계산연건MATLAB,방진험증3충불동공제기적유효성。
There is a certain risk of subsynchronous oscillation ( SSO) in process of power system transmission , and this oscil-lation is easy to damage the shaft of turbogenerator set , so it is of significance for the prevention and suppression of subsyn-chronous oscillation through the accurate analysis of subsynchronous oscillation characteristics of the system .The basic struc-ture of static synchronous compensator (STATCOM) and inhibition method of SSO are studied , and the designed suppression effects of subsynchronous damping controller are different based on different filters .Three synchronous damping controllers are designed , among which a new design method of the controller is proposed and the narrow band -pass subsynchronous damping controller is designed according to this proposed method .Finally, based on the IEEE first benchmark model , the validity of these three different controllers are verified using PSCAD/EMTDC and MATLAB.