电力系统自动化
電力繫統自動化
전력계통자동화
AUTOMATION OF ELECTRIC POWER SYSTEMS
2014年
14期
118-121
,共4页
杨建明%卢宇%许训祎%张栋%邓吉勇
楊建明%盧宇%許訓祎%張棟%鄧吉勇
양건명%로우%허훈의%장동%산길용
直流输电%线路保护%线路纵差保护%线路低电压保护%站间通道延时
直流輸電%線路保護%線路縱差保護%線路低電壓保護%站間通道延時
직류수전%선로보호%선로종차보호%선로저전압보호%참간통도연시
direct current transmission%line protection%line longitudinal differential protection%line low voltage protection%time delay of telecomm between two converter stations
直流工程线路保护应该根据具体工程的特点来配置。文中在分析芦嵊直流工程特点和控制系统对保护影响的基础上选取了线路纵差保护作为芦嵊直流的主保护,并配置线路低电压保护作为后备保护。同时考虑到站间通道延时的存在,区外故障可能会引起线路纵差保护误动,提出了一种补偿站间通道延时的方法,提高了线路纵差保护动作的可靠性。线路低电压保护作为后备保护,弥补了失去站间通信情况下线路纵差保护闭锁的缺陷。通过 RTDS 模拟试验,验证了上述保护配置的可行性以及线路纵差保护作为主保护的可靠性。
直流工程線路保護應該根據具體工程的特點來配置。文中在分析蘆嵊直流工程特點和控製繫統對保護影響的基礎上選取瞭線路縱差保護作為蘆嵊直流的主保護,併配置線路低電壓保護作為後備保護。同時攷慮到站間通道延時的存在,區外故障可能會引起線路縱差保護誤動,提齣瞭一種補償站間通道延時的方法,提高瞭線路縱差保護動作的可靠性。線路低電壓保護作為後備保護,瀰補瞭失去站間通信情況下線路縱差保護閉鎖的缺陷。通過 RTDS 模擬試驗,驗證瞭上述保護配置的可行性以及線路縱差保護作為主保護的可靠性。
직류공정선로보호응해근거구체공정적특점래배치。문중재분석호승직류공정특점화공제계통대보호영향적기출상선취료선로종차보호작위호승직류적주보호,병배치선로저전압보호작위후비보호。동시고필도참간통도연시적존재,구외고장가능회인기선로종차보호오동,제출료일충보상참간통도연시적방법,제고료선로종차보호동작적가고성。선로저전압보호작위후비보호,미보료실거참간통신정황하선로종차보호폐쇄적결함。통과 RTDS 모의시험,험증료상술보호배치적가행성이급선로종차보호작위주보호적가고성。
The DC line protection should be configured according to the characteristics of the specific project.On the basis of an analysis of the characteristics of Lusheng high voltage direct current(HVDC)project and the influence of the control system on the protection,the line longitudinal differential protection is selected as the main DC line protection and low voltage protection as back up protection.Meanwhile,in consideration of the existence of the time delay of telecom between two converter stations,protection false trip may occur because of asynchronous comparison of line terminals current.In order to eliminate the impact of the time delay,a method of compensating for the channel delay is proposed.With this method,the low voltage protection as the backup protection will act in case the telecom is interrupted and longitudinal differential protection is out of work.The reliability and sensitivity of line protection have been verified by real-time digital simulator (RTDS) based simulation tests.