CAJ | 학술논문

超导故障限流器对限制短路电流和短路容量具有重要的研究意义。文中基于 MgB2的特性,采用先变形后退火的方法,并利用特制高温玻璃纤维进行绝缘,在退火处理后再通过环氧树脂胶黏剂固化,研制了一台小体积电阻型超导故障限流器样机。同时通过液氦和氦气冷却,对其性能进行测试；通过建立电阻型超导故障限流器的一维热传导模型和电路方程,对其动作特性进行仿真。测试和仿真结果表明该样机限流效果明显,限流百分比可达44%以上,然而限流器的失超长度、超导线材温度和失超电阻随着时间呈非线性变化且限流器的线材并未全部失超。失超恢复时间约为1.5 s,可通过交替连接方式满足重合闸需求。最后针对10 kV 电力系统,提出了 MgB2的小体积电阻型超导故障限流器工程设计原理,并分析了其在工程应用中的可行性。
초도고장한류기대한제단로전류화단로용량구유중요적연구의의。문중기우 MgB2적특성,채용선변형후퇴화적방법,병이용특제고온파리섬유진행절연,재퇴화처리후재통과배양수지효점제고화,연제료일태소체적전조형초도고장한류기양궤。동시통과액양화양기냉각,대기성능진행측시；통과건립전조형초도고장한류기적일유열전도모형화전로방정,대기동작특성진행방진。측시화방진결과표명해양궤한류효과명현,한류백분비가체44%이상,연이한류기적실초장도、초도선재온도화실초전조수착시간정비선성변화차한류기적선재병미전부실초。실초회복시간약위1.5 s,가통과교체련접방식만족중합갑수구。최후침대10 kV 전력계통,제출료 MgB2적소체적전조형초도고장한류기공정설계원리,병분석료기재공정응용중적가행성。
The study of superconducting fault current limiter is significant and important for limiting short circuit current and short circuit capacity.Based on the properties of the MgB2 ,a small resistive-type superconducting fault current limiter(SFCL) prototype insulated by a special high temperature glass fiber is developed in the process of deformation,annealing and curing by epoxy adhesive.The prototype cooled by liquid helium and helium is tested and simulated by a one-dimensional heat conduction model and circuit equation.The results show that the current limiting effect of the SFCL is obvious and the short-current is limited by 44% and above,but the resistance of SFCL,the quenching length and temperature on the superconducting wire vary nonlinearly with time while the SFCL does not quench completely.The quench recovery time is about 1.5 s.So reclosing can be solved by alternately connecting the current limiting elements on the power grid.Finally,for 10 kV power systems,the project design principles of small resistive-type superconducting fault current limiter based on MgB2 are proposed,with the feasibility of engineering application analyzed. This work is supported by Jiangsu Provincial Key Technologies R&D Program of China (No.BE2009053) and Jiangsu Provincial Innovation Fund for Industry-university-research Cooperation of China(No.BY201115).