城市建筑
城市建築
성시건축
URBANISM AND ARCHITECTURE
2014年
15期
118-118,162
,共2页
支撑架%制作%原理%施工工艺
支撐架%製作%原理%施工工藝
지탱가%제작%원리%시공공예
supporting-frame%production%principle%constru-ction-technology
墙体大钢模的普及，打破了传统木模支模方式，提升了施工效率和经济效益，但同时容易在楼层交接部位产生流坠和错台现象，根据此现象分析原因、找出症结后，制作一种新型支撑架，用以改善此类现象。本文主要讲述支撑架原理及施工工艺。
牆體大鋼模的普及，打破瞭傳統木模支模方式，提升瞭施工效率和經濟效益，但同時容易在樓層交接部位產生流墜和錯檯現象，根據此現象分析原因、找齣癥結後，製作一種新型支撐架，用以改善此類現象。本文主要講述支撐架原理及施工工藝。
장체대강모적보급，타파료전통목모지모방식，제승료시공효솔화경제효익，단동시용역재루층교접부위산생류추화착태현상，근거차현상분석원인、조출증결후，제작일충신형지탱가，용이개선차류현상。본문주요강술지탱가원리급시공공예。
The popularity of large steel mould breaks the traditional wooden shut ering method and improves the con-struction efficiency and economic benefit, which also easy to create the floor fall and fault phenomenon in the region tra-nsition. After according to the reasons analysis for the phe-nomenon and finding out the sticking point, the author makes a new type of brace to improve this kind of phenomenon. This article mainly tel s the brace principle and construction tec-hnology.
