四川化工
四川化工
사천화공
SICHUAN CHEMICAL INDUSTRY
2014年
3期
41-45
,共5页
王袁隆%施光明%李泉%陈士清%刘娇
王袁隆%施光明%李泉%陳士清%劉嬌
왕원륭%시광명%리천%진사청%류교
CFD%搅拌式细胞反应器%推进式桨叶%挡板%Realizable k-ε模型
CFD%攪拌式細胞反應器%推進式槳葉%擋闆%Realizable k-ε模型
CFD%교반식세포반응기%추진식장협%당판%Realizable k-ε모형
借助CFD理论与技术和商业软件Fluent对YD生物公司的650L搅拌式细胞反应器挡板对流场的影响进行了数值模拟与分析.针对直径D=800mm,液位高度为h=1000mm,推进式桨叶直径为Φ=350mm,桨叶距罐底高度H=355mm,转速n=60rpm的搅拌式细胞反应器,通过改变反应器所加装挡板的数量,运用Realizable k-ε湍流计算模型模拟分析在罐体壁均布挡板数量分另为0、2、3、4、5、6等六种情况下的流场,并对模拟结果分析比较;发现挡板对流场的影响明显,均布5块挡板时流场整体轴流性最好.
藉助CFD理論與技術和商業軟件Fluent對YD生物公司的650L攪拌式細胞反應器擋闆對流場的影響進行瞭數值模擬與分析.針對直徑D=800mm,液位高度為h=1000mm,推進式槳葉直徑為Φ=350mm,槳葉距罐底高度H=355mm,轉速n=60rpm的攪拌式細胞反應器,通過改變反應器所加裝擋闆的數量,運用Realizable k-ε湍流計算模型模擬分析在罐體壁均佈擋闆數量分另為0、2、3、4、5、6等六種情況下的流場,併對模擬結果分析比較;髮現擋闆對流場的影響明顯,均佈5塊擋闆時流場整體軸流性最好.
차조CFD이론여기술화상업연건Fluent대YD생물공사적650L교반식세포반응기당판대류장적영향진행료수치모의여분석.침대직경D=800mm,액위고도위h=1000mm,추진식장협직경위Φ=350mm,장협거관저고도H=355mm,전속n=60rpm적교반식세포반응기,통과개변반응기소가장당판적수량,운용Realizable k-ε단류계산모형모의분석재관체벽균포당판수량분령위0、2、3、4、5、6등륙충정황하적류장,병대모의결과분석비교;발현당판대류장적영향명현,균포5괴당판시류장정체축류성최호.