地震工程学报
地震工程學報
지진공정학보
China Earthquake Engineering Journal
2014年
2期
331-337
,共7页
刘代芹%李杰%王晓强%祝意青%方伟
劉代芹%李傑%王曉彊%祝意青%方偉
류대근%리걸%왕효강%축의청%방위
新疆%重力场%构造环境%异常变化%梯度带
新疆%重力場%構造環境%異常變化%梯度帶
신강%중력장%구조배경%이상변화%제도대
Xinjiang%gravity field%tectonic environment%anomaly change%gradient zone
首次利用1998-2010年共6期全国地壳运动网、数字地震网和陆态网络重力观测数据,通过整理计算平差,分别绘制了新疆及周边部分地区(西藏、甘肃、青海和宁夏)2~3年尺度重力场差分变化和累计变化图像,并结合动力构造环境和强震活动,剖析该地区重力变化特征及与强震孕育之间的响应关系。分析表明:新疆及周边地区重力场变化较明显,重力异常变化值较大,2~3年为尺度的重力变化值最大达到-140×10-8 ms-2;地震发生在重力变化转折、高梯度带附近和主要控制构造交汇部位;新疆及周边地区重力变化具有明显的分区特征,重力变化机制的差异与构造环境密切相关。
首次利用1998-2010年共6期全國地殼運動網、數字地震網和陸態網絡重力觀測數據,通過整理計算平差,分彆繪製瞭新疆及週邊部分地區(西藏、甘肅、青海和寧夏)2~3年呎度重力場差分變化和纍計變化圖像,併結閤動力構造環境和彊震活動,剖析該地區重力變化特徵及與彊震孕育之間的響應關繫。分析錶明:新疆及週邊地區重力場變化較明顯,重力異常變化值較大,2~3年為呎度的重力變化值最大達到-140×10-8 ms-2;地震髮生在重力變化轉摺、高梯度帶附近和主要控製構造交彙部位;新疆及週邊地區重力變化具有明顯的分區特徵,重力變化機製的差異與構造環境密切相關。
수차이용1998-2010년공6기전국지각운동망、수자지진망화륙태망락중력관측수거,통과정리계산평차,분별회제료신강급주변부분지구(서장、감숙、청해화저하)2~3년척도중력장차분변화화루계변화도상,병결합동력구조배경화강진활동,부석해지구중력변화특정급여강진잉육지간적향응관계。분석표명:신강급주변지구중력장변화교명현,중력이상변화치교대,2~3년위척도적중력변화치최대체도-140×10-8 ms-2;지진발생재중력변화전절、고제도대부근화주요공제구조교회부위;신강급주변지구중력변화구유명현적분구특정,중력변화궤제적차이여구조배경밀절상관。
By calculating six stages of gravity data from 1998 to 2010,we obtained images of the differences and the cumulative changes in the gravity field within 2~3 year periods in Xinjiang and its adjacent areas (Tibet,Gansu,Qinghai,and Ningxia).We then analyzed the corresponding relationship between the gravity changes and strong earthquake preparation through the dynamic structural environment and earthquake activity in Xinjiang.The results showed that the gravity field in Xinjiang changed obviously with a maximum of about- 146 × 10 -8 ms-2 within two to three years;earthquakes usually happened in a high gradient belt and in the main structural sec-tion;and the changing mechanism and differential of the gravity field were strongly related to the structural environment.In order to obtain dynamic changing images of the gravity field in Xinjiang and its adjacent region and the corresponding relationship between gravity change and strong earthquake preparation,this paper selected 100 gravity points (four to six absolute points and more than ninety solute points)which formed a monitoring network spread throughout Xinjiang, Tibet,Gansu,Qinghai and Ningxia via the China Seismological Bureau,the Zongcan Bureau,the Chinese Academy of Sciences and the state bureau of surveying and mapping unit.The data was processed with LGADJ software from the China Earthquake Administration.First,we selected relative and stable points to adjust the calculation process and address a few errors arising from a more significant and gross error,then proceeded with processing to reasonably determine the prior variance of each instrument.When we used the absolute gravity data to adjust the calculation process,we calibrated the weight in the 5 × 10-8 ms-2 precision relative gravity measurement data with the instruments used,by iterative computation.The results showed the accuracy to be within (8~12)× 10-8 ms-2 and the gravity change accuracy to be 15×10 -8 ms-2 .We found the anomaly region of the gravity field to usually have a high spatial gradient.Through our study on the evolu-tion process in Xinjiang and its adjacent region,study results also revealed that an earthquake with an MS of 6.0 happened in this region.Due to an accumulation of stress,strain,and various physi-cal features during earthquake preparation,Tianshan was pressed by the Tibetan plateau and Pamir with gravity decreasing in negative areas.The gravity value shows that the Tarim basin de-scended in the northwest,being pressed and accumulating in this region.