西安工业大学学报
西安工業大學學報
서안공업대학학보
JOURNAL OF XI'AN TECHNOLOGICAL UNIVERSITY
2014年
6期
446-449,464
,共5页
田军委%邱望志%张艳%王岗罡
田軍委%邱望誌%張豔%王崗罡
전군위%구망지%장염%왕강강
燃油热熔釜%恒流密度加热%Fluent%温度场
燃油熱鎔釜%恆流密度加熱%Fluent%溫度場
연유열용부%항류밀도가열%Fluent%온도장
fuel thermal reactor%constant current density heating%Fluent%temperature field
为了得到燃油热熔釜在稳态加热条件下热熔釜釜壁的温度场分布情况.文中采用热平衡计算法对燃油热熔釜系统燃烧室内的热量分布进行了理论分析,并在恒流密度加热情况下,利用Fluent软件对燃油热熔釜热熔釜壁的温度场进行了仿真分析.仿真结果表明:在热流密度q=9809.1 W/m2加热情况下,热熔釜壁釜壁平均温度为330℃,仿真结果跟实际测得数据基本相符.
為瞭得到燃油熱鎔釜在穩態加熱條件下熱鎔釜釜壁的溫度場分佈情況.文中採用熱平衡計算法對燃油熱鎔釜繫統燃燒室內的熱量分佈進行瞭理論分析,併在恆流密度加熱情況下,利用Fluent軟件對燃油熱鎔釜熱鎔釜壁的溫度場進行瞭倣真分析.倣真結果錶明:在熱流密度q=9809.1 W/m2加熱情況下,熱鎔釜壁釜壁平均溫度為330℃,倣真結果跟實際測得數據基本相符.
위료득도연유열용부재은태가열조건하열용부부벽적온도장분포정황.문중채용열평형계산법대연유열용부계통연소실내적열량분포진행료이론분석,병재항류밀도가열정황하,이용Fluent연건대연유열용부열용부벽적온도장진행료방진분석.방진결과표명:재열류밀도q=9809.1 W/m2가열정황하,열용부벽부벽평균온도위330℃,방진결과근실제측득수거기본상부.
In order to get the temperature distribution on tank wall of fuel thermal reactor under steady heating conditions ,the heat distribution system in the combustion chamber of fuel thermal reactor was analyzed by the heat balance calculations .The temperature field of thermal reactor wall ,heated at a constant current density ,is simulated using Fluent software .Simulation results show :The average temperature of thermal reactor vessel wall ,heated at heat flux q= 9 809 .1 W/m2 ,is 330 ℃ ,which is basically in line with the actual measured data .