机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2014年
11期
90-92,131
,共4页
张明松%朱普先%柯建军%朱亿宽
張明鬆%硃普先%柯建軍%硃億寬
장명송%주보선%가건군%주억관
齿形参数%应力%应变%正交试验%有限元
齒形參數%應力%應變%正交試驗%有限元
치형삼수%응력%응변%정교시험%유한원
Tooth parameters%Stress%Strain%Orthogonal test%Finite element
通过正交试验和有限元软件ANSYS分析了鼠牙形齿的前角、顶角及齿根圆角对圆锯片应力应变的影响,分析了齿根圆半径对各种最大应力的影响。结果表明:前角、顶角及齿根圆角对锯片应变的影响很小,齿根圆半径对最大径向压应力、切向拉应力和最大Von Mises应力影响相对最大,齿顶角对其影响相对最小;齿顶角对最大径向拉应力和切向压应力影响相对最大,齿前角对其影响相对最小。得出了最佳齿根圆半径范围,同时找到了最大Von Mises应力分布特点。
通過正交試驗和有限元軟件ANSYS分析瞭鼠牙形齒的前角、頂角及齒根圓角對圓鋸片應力應變的影響,分析瞭齒根圓半徑對各種最大應力的影響。結果錶明:前角、頂角及齒根圓角對鋸片應變的影響很小,齒根圓半徑對最大徑嚮壓應力、切嚮拉應力和最大Von Mises應力影響相對最大,齒頂角對其影響相對最小;齒頂角對最大徑嚮拉應力和切嚮壓應力影響相對最大,齒前角對其影響相對最小。得齣瞭最佳齒根圓半徑範圍,同時找到瞭最大Von Mises應力分佈特點。
통과정교시험화유한원연건ANSYS분석료서아형치적전각、정각급치근원각대원거편응력응변적영향,분석료치근원반경대각충최대응력적영향。결과표명:전각、정각급치근원각대거편응변적영향흔소,치근원반경대최대경향압응력、절향랍응력화최대Von Mises응력영향상대최대,치정각대기영향상대최소;치정각대최대경향랍응력화절향압응력영향상대최대,치전각대기영향상대최소。득출료최가치근원반경범위,동시조도료최대Von Mises응력분포특점。
The orthogonal test and finite element (FE)ANSYS software were used to analyze the influence of rat tooth’s rake an-gle,apex angle and tooth root fillet on the stress strain of saw blade.The influence of tooth root fillet on all kinds of maximum stress was analyzed.The results show that the influence of rake angle,apex angle and tooth root fillet on the strain of saw blade is very small. The radius of tooth root fillet is the largest influence relatively of maximum radial compressive stress,tangential tensile stress and maxi-mum Von Mises stress,and apex angle’s influence is at minimum relatively.Apex angle is the largest influence relatively of maximum radial tensile stress and tangential compressive stress,and rake angle’s influence is at minimum relatively.The optimal range of radius of tooth root fillet is obtained,at the same time,the maximum Von Mises stress distribution characteristics is found.