中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2014年
13期
1729-1733,1734
,共6页
李俊烨%许颖%杨立峰%刘薇娜
李俊燁%許穎%楊立峰%劉薇娜
리준엽%허영%양립봉%류미나
磨粒流加工%非直线管%实验分析%工艺研究
磨粒流加工%非直線管%實驗分析%工藝研究
마립류가공%비직선관%실험분석%공예연구
abrasive flow machining%non-linear tube%experimental analysis%technological research
为探讨磨粒流加工非直线管零件的加工机理及加工工艺,以共轨管为研究对象,利用自行研制的磨粒流抛光液对磨粒流加工非直线管关键工艺参数进行实验研究,定量化评价工件表面粗糙度与加工参数间的显性关系,探讨关键工艺参数对工件表面精度的影响,实验证实磨粒流加工确实可以明显改善非直线管零件的表面质量,从而提高非直线管零件的工作可靠性和使用寿命。实验结果可为磨粒流加工理论的优化研究提供参考,对确定磨粒流加工非直线管零件最优工艺方案具有一定的指导意义。
為探討磨粒流加工非直線管零件的加工機理及加工工藝,以共軌管為研究對象,利用自行研製的磨粒流拋光液對磨粒流加工非直線管關鍵工藝參數進行實驗研究,定量化評價工件錶麵粗糙度與加工參數間的顯性關繫,探討關鍵工藝參數對工件錶麵精度的影響,實驗證實磨粒流加工確實可以明顯改善非直線管零件的錶麵質量,從而提高非直線管零件的工作可靠性和使用壽命。實驗結果可為磨粒流加工理論的優化研究提供參攷,對確定磨粒流加工非直線管零件最優工藝方案具有一定的指導意義。
위탐토마립류가공비직선관령건적가공궤리급가공공예,이공궤관위연구대상,이용자행연제적마립류포광액대마립류가공비직선관관건공예삼수진행실험연구,정양화평개공건표면조조도여가공삼수간적현성관계,탐토관건공예삼수대공건표면정도적영향,실험증실마립류가공학실가이명현개선비직선관령건적표면질량,종이제고비직선관령건적공작가고성화사용수명。실험결과가위마립류가공이론적우화연구제공삼고,대학정마립류가공비직선관령건최우공예방안구유일정적지도의의。
In order to discuss the machining mechanism and technology of abrasive flow machining for non-linear tube parts,a common rail tube was employed as the experimental subject.A self-devel-oped abrasive flow polishing solution was used to machine non-linear tubes,and the key processing parameters were obtained during the machining processes.Through the analysis of these processing parameters,dominant relationship between the surface roughness of parts and machining parameters was evaluated quantifiably,the impact of key processing parameters on surface precision of the parts was explored.It is concluded that the abrasive flow machining can improve non-linear tube parts sur-face quality obviously,and improve the working reliability and service life of non-linear tube parts. The experimental results can provide the technology reference for the optimization of abrasive flow machining theories,and offer the guiding significance for determination of the optimal technology plan of abrasive flow machining non-linear tube parts.