电池工业
電池工業
전지공업
CHINESE BATTERY INDUSTRY
2014年
2期
71-75
,共5页
陈强%胡航%赵瑞瑞%朱继涛%蒋建辉%陈红雨
陳彊%鬍航%趙瑞瑞%硃繼濤%蔣建輝%陳紅雨
진강%호항%조서서%주계도%장건휘%진홍우
锂离子电池%5 V正极材料%LiNi0.5 Mn1.5O4%溶胶-凝胶法
鋰離子電池%5 V正極材料%LiNi0.5 Mn1.5O4%溶膠-凝膠法
리리자전지%5 V정겁재료%LiNi0.5 Mn1.5O4%용효-응효법
Li-ion battery%5 V cathode material%LiNi0.5 Mn1.5 O4%sol-gel method
采用溶胶-凝胶法制备了5 V正极材料LiNi0.5 Mn1.5 O4。将混合盐溶液以不同速度加入草酸溶液中,对制得的LiNi0.5 Mn1.5 O4材料的结构、形貌和电化学性能会产生显著的影响。结果表明:将盐溶液以0.17 mL/s的速度加入到草酸中,预烧温度为450℃,焙烧4 h,后900℃焙烧6 h制得的样品为粒径均匀的多面体,1 C 充放电初始容量达到135 mAh/g,55次循环后的放电比容量保持率为96.26%。
採用溶膠-凝膠法製備瞭5 V正極材料LiNi0.5 Mn1.5 O4。將混閤鹽溶液以不同速度加入草痠溶液中,對製得的LiNi0.5 Mn1.5 O4材料的結構、形貌和電化學性能會產生顯著的影響。結果錶明:將鹽溶液以0.17 mL/s的速度加入到草痠中,預燒溫度為450℃,焙燒4 h,後900℃焙燒6 h製得的樣品為粒徑均勻的多麵體,1 C 充放電初始容量達到135 mAh/g,55次循環後的放電比容量保持率為96.26%。
채용용효-응효법제비료5 V정겁재료LiNi0.5 Mn1.5 O4。장혼합염용액이불동속도가입초산용액중,대제득적LiNi0.5 Mn1.5 O4재료적결구、형모화전화학성능회산생현저적영향。결과표명:장염용액이0.17 mL/s적속도가입도초산중,예소온도위450℃,배소4 h,후900℃배소6 h제득적양품위립경균균적다면체,1 C 충방전초시용량체도135 mAh/g,55차순배후적방전비용량보지솔위96.26%。
LiNi0.5 Mn1.5 O4 powders were synthesized by sol-gel method.The salt solution was add-ed into the oxalic acid solution at different feeding speeds.The crystal structures,material mor-phologies and electrochemical performances of the LiNi0.5 Mn1.5 O4 cathode materials were exam-ined by XRD and SEM technologies.The results reveal optimized synthesis parameters:the salt solution of a feeding speed of 0.17 ml/s and preheated temperature at 450 ℃ for 4 h.The as-made material delivers a discharge capacity of 1 3 5 mAh/g at 1 C rate with a high capacity reten-tion of 96.26% after 55 cycles.