CAJ | 학술논문

VSM型金属硅粉碎机主要使用在光伏产品的原料生产上，金属硅制作的主要耗能设备。获得良好的产品粒度分布延长设备的使用寿命是企业主要考虑的问题。通过对金属硅物料性能要求和粉碎机本身的要求这两方面着手，对设备的刀片的末端线速度、刀片厚度和进料口结构、衬板与刀片间隙及设备耐磨性进行研究，通过经验数据确定了粉碎机基本参数，得出了精确地设计可提高出料率，同时降低单位成本能耗的结论。
VSM형금속규분쇄궤주요사용재광복산품적원료생산상，금속규제작적주요모능설비。획득량호적산품립도분포연장설비적사용수명시기업주요고필적문제。통과대금속규물료성능요구화분쇄궤본신적요구저량방면착수，대설비적도편적말단선속도、도편후도화진료구결구、츤판여도편간극급설비내마성진행연구，통과경험수거학정료분쇄궤기본삼수，득출료정학지설계가제고출료솔，동시강저단위성본능모적결론。
VSM series silicon metal crusher is mainly used in the production of early photovoltaic products. Silicon metal is produced by these major energy-consuming devices. To get a good product size distribution, so as to prolong the usage life of equipment is the main consideration and focus in production enterprises. Through silicon metal material performance and mill itself improvement, as the end of the line speed of the blades, blade thickness, the inlet structure, gap of liner with blade and abrasion resistance of equipment, these parameters were comprehensive optimized. Experience data was added to determine the basic parameters of the mill. The result demonstrates that discharge rates precisely were designed and improved, while the unit cost of energy conclusions was reduced.