CAJ | 학술논문

本文采用纳米二氧化钛(TiO2)作为增强材料对环氧树脂进行改性，通过三辊研磨分散制备了纳米TiO2/环氧树脂涂层，研究了纳米TiO2含量对涂层硬度、附着力、柔韧性、冲击性能和耐磨性的影响。结果表明，随着纳米TiO2的适量加入，环氧树脂涂层的各项物理性能得到很大改善，当纳米TiO2的加入量为4wt.%时，达到最佳值。
본문채용납미이양화태(TiO2)작위증강재료대배양수지진행개성，통과삼곤연마분산제비료납미TiO2/배양수지도층，연구료납미TiO2함량대도층경도、부착력、유인성、충격성능화내마성적영향。결과표명，수착납미TiO2적괄량가입，배양수지도층적각항물이성능득도흔대개선，당납미TiO2적가입량위4wt.%시，체도최가치。
In this paper, epoxy resin were modified by using nano-TiO2. The nano-TiO2/epoxy resin coatings were prepared by the three-roll grinder dispersing technology. The effects of the nano-TiO2 content on the physical properties of coatings were studied, including hardness, adhesion, flexibility, impact property and abrasive resistance. The results showed that all physical performance improved with the proper addition of nano-TiO2. The epoxy resin coating exhibited optimal properties while the amount of nano-TiO2was 4wt.%.