CAJ | 학술논문

在铅酸蓄电池铸板过程中，板栅模具表面需要喷涂一层喷模剂来达到控制板栅重量和厚度的目的，本技术配制溶液 a 和溶液 b，在喷涂板栅模具的过程中配合使用，达到了很好的保温作用，通过铸板实验，生产G25K＋单片板栅、G16B-双连片板栅和G8B＋三连片板栅，并对板栅重量厚度进行测量，发现新型喷模剂的使用能够很好地控制板栅的重量和厚度，增强板栅的一致性，延长喷模剂的使用时间，提高生产效率。
재연산축전지주판과정중，판책모구표면수요분도일층분모제래체도공제판책중량화후도적목적，본기술배제용액 a 화용액 b，재분도판책모구적과정중배합사용，체도료흔호적보온작용，통과주판실험，생산G25K＋단편판책、G16B-쌍련편판책화G8B＋삼련편판책，병대판책중량후도진행측량，발현신형분모제적사용능구흔호지공제판책적중량화후도，증강판책적일치성，연장분모제적사용시간，제고생산효솔。
In the grid casting process for lead-acid batteries, the surface of the mold needs to be covered a spraying coat to control the weight and thickness of the grids. In this work we prepared two kinds of solutions (a and b) for mold spraying and achieved good insulation effect. By the casting experiment on producing G25K+ single grid, G16B- double contiguous grid and G8B+ three contiguous grid and measurements of the grid weight and thickness, it has been found that there are great effects of using new mold spray agent as it is beneficial to the grids in regard to their controlling the weight and thickness, enhancing the consistency, extending the service time of the gird and increasing the productivity.