热力发电
熱力髮電
열력발전
THERMAL POWER GENERATION
2014年
5期
21-25,53
,共6页
田松峰%柴艳琴%向同琼%周广沙
田鬆峰%柴豔琴%嚮同瓊%週廣沙
전송봉%시염금%향동경%주엄사
SCAL型间接空冷系统%数值模拟%通风量%出口速度%多孔介质
SCAL型間接空冷繫統%數值模擬%通風量%齣口速度%多孔介質
SCAL형간접공랭계통%수치모의%통풍량%출구속도%다공개질
SCAL indirect air cooling%numerical simulation%ventilation rate%exit velocity%porous medium
根据某SCAL型自然通风空气冷却塔(空冷塔)散热管束的实际尺寸和冷却三角的布置方式,对塔底换热单元建立了几何模型,并基于 RNG k-ε紊流模型和多孔介质模型,对塔内外流场进行了三维数值模拟,探究了环境条件对其运行特性的影响。研究结果表明:随着环境风速的增加,空冷塔迎风面进口风速逐渐增加,而侧风面和背风面的进口风速则呈下降趋势,且该趋势随温度的上升愈加明显;空冷塔的通风量和塔出口速度随环境风速的增加先增大后减小,且在风速为2m/s 时,其通风量和出口速度最大。
根據某SCAL型自然通風空氣冷卻塔(空冷塔)散熱管束的實際呎吋和冷卻三角的佈置方式,對塔底換熱單元建立瞭幾何模型,併基于 RNG k-ε紊流模型和多孔介質模型,對塔內外流場進行瞭三維數值模擬,探究瞭環境條件對其運行特性的影響。研究結果錶明:隨著環境風速的增加,空冷塔迎風麵進口風速逐漸增加,而側風麵和揹風麵的進口風速則呈下降趨勢,且該趨勢隨溫度的上升愈加明顯;空冷塔的通風量和塔齣口速度隨環境風速的增加先增大後減小,且在風速為2m/s 時,其通風量和齣口速度最大。
근거모SCAL형자연통풍공기냉각탑(공랭탑)산열관속적실제척촌화냉각삼각적포치방식,대탑저환열단원건립료궤하모형,병기우 RNG k-ε문류모형화다공개질모형,대탑내외류장진행료삼유수치모의,탐구료배경조건대기운행특성적영향。연구결과표명:수착배경풍속적증가,공랭탑영풍면진구풍속축점증가,이측풍면화배풍면적진구풍속칙정하강추세,차해추세수온도적상승유가명현;공랭탑적통풍량화탑출구속도수배경풍속적증가선증대후감소,차재풍속위2m/s 시,기통풍량화출구속도최대。
According to the actual size of cooling tube bundle and the arrangement of cooling trian-gle of a surface condenser aluminum exchangers (SCAL)natural draft cooling tower,the geomet-ric model of heat transfer elements at the tower bottom was established.On the basis of the RNG k-εturbulence model and porous medium model,three-dimensional numerical simulation was car-ried out for the inner and external flow field of the air cooling tower,to investigate the influence of environmental conditions on the tower's operation performance.The results show that,with an increase in ambient wind speed,the inlet air speed at windward side of the tower increases gradu-ally,while that at crosswind side and lee side decreases and tends to be obvious;the tower ventila-tion rate and outlet air speed increases at first and then decreases,and their maximum values ap-pear when the wind speed is 2 m/s.