CAJ | 학술논문

通过成形过程中的动能和内能判断仿真是否符合准静态成形要求，采用正交试验得到最佳的仿真参数，通过试验验证考查能量和正交试验相结合的方法能否得到高质量的仿真结果，结果表明该方法在板料冲压成形仿真质量控制中可行。
통과성형과정중적동능화내능판단방진시부부합준정태성형요구，채용정교시험득도최가적방진삼수，통과시험험증고사능량화정교시험상결합적방법능부득도고질량적방진결과，결과표명해방법재판료충압성형방진질량공제중가행。
To get a method of improving the simulation results and reduce the reliance on experience, a research was carried out by selecting quasi-static forming of sheet metal. First, whether the simulation met the requirements of quasi-static forming was checked through kinetic and internal energy of the forming process; then the best simulation parame-ters were obtained through orthogonal experiments; finally high-quality simulation results was get through examining the results of combing energy and orthogonal experiment meth-od. The results show that the method is feasible in quasi-static sheet metal forming.