化工进展
化工進展
화공진전
CHEMICAL INDUSTRY AND ENGINEERING PROGRESS
2014年
8期
1957-1962,1969
,共7页
杨濮亦%王仕博%王华%熊靓%刘泛函
楊濮亦%王仕博%王華%熊靚%劉汎函
양복역%왕사박%왕화%웅정%류범함
下降流%气液两相流%流动%界面%混合
下降流%氣液兩相流%流動%界麵%混閤
하강류%기액량상류%류동%계면%혼합
download flow%gas-liquid flow%flow%interface%mixing
贫化电炉气液顶吹喷枪是一种独特的垂直下降管,其一端 Y 形通入气液两相,一端直接通入熔池中进行喷吹作业。本文采用多相流水模型模拟仿真的实验手段进行了定量分析,结果表明:不同于传统的垂直下降管,这种顶吹喷枪的管内流型受气液相间压差的影响,产生了一种由环状流过渡为泡状流的流型,不同流型的分布区域与压差的大小有关并且稳定存在;在支管与主管的交叉区域,对于不同的气液比存在3种气液混合相分界面,并各自产生不同的流型;浸没式顶吹气泡群形态在不同的管内流型驱动下有较大差异,表现在深度及宽度两个方面,并证明了气液比为2~5间的生产效果是最佳的。
貧化電爐氣液頂吹噴鎗是一種獨特的垂直下降管,其一耑 Y 形通入氣液兩相,一耑直接通入鎔池中進行噴吹作業。本文採用多相流水模型模擬倣真的實驗手段進行瞭定量分析,結果錶明:不同于傳統的垂直下降管,這種頂吹噴鎗的管內流型受氣液相間壓差的影響,產生瞭一種由環狀流過渡為泡狀流的流型,不同流型的分佈區域與壓差的大小有關併且穩定存在;在支管與主管的交扠區域,對于不同的氣液比存在3種氣液混閤相分界麵,併各自產生不同的流型;浸沒式頂吹氣泡群形態在不同的管內流型驅動下有較大差異,錶現在深度及寬度兩箇方麵,併證明瞭氣液比為2~5間的生產效果是最佳的。
빈화전로기액정취분창시일충독특적수직하강관,기일단 Y 형통입기액량상,일단직접통입용지중진행분취작업。본문채용다상류수모형모의방진적실험수단진행료정량분석,결과표명:불동우전통적수직하강관,저충정취분창적관내류형수기액상간압차적영향,산생료일충유배상류과도위포상류적류형,불동류형적분포구역여압차적대소유관병차은정존재;재지관여주관적교차구역,대우불동적기액비존재3충기액혼합상분계면,병각자산생불동적류형;침몰식정취기포군형태재불동적관내류형구동하유교대차이,표현재심도급관도량개방면,병증명료기액비위2~5간적생산효과시최가적。
The top blowing nuzzle for slag cleaning furnace is a distinctive kind of vertical downward pipe. Gas and liquid enter the pipeline from the Y-type tube,the other end of the nozzle is immersed in the molten pool. This paper analyzed multiphase flow quantitatively using simulation model in the experiments. The results show that the pressure difference of gas-liquid phase caused a transition from steady annular flow to steady bubbly flow was,and the area of each flow pattern depended on of the pressure difference. Three types of gas-liquid flows presented at the phase interface in the section between the main pipe and branch pipe(the area of mixing phase of gas and liquid). The differences of bubbles stirred by immersion top blowing on different flow patterns were manifested in depth and width. The production was optimal at gas-liquid ratio of 2-5.