无线电工程
無線電工程
무선전공정
RADIO ENGINEERING OF CHINA
2014年
8期
74-77
,共4页
魏利郝%盛荣志%甄建勇%陈小兵
魏利郝%盛榮誌%甄建勇%陳小兵
위리학%성영지%견건용%진소병
LDMOS 晶体管%宽带匹配%传输线变压器%巴伦%3 dB 电桥
LDMOS 晶體管%寬帶匹配%傳輸線變壓器%巴倫%3 dB 電橋
LDMOS 정체관%관대필배%전수선변압기%파륜%3 dB 전교
LDMOS transistor%wideband matching%line transformer%balun%3dB bridge
介绍了一种小型高性能 UHF 频段150 W 放大器的设计与实现。 UHF 频段功率管种类很多,选择合适的功率管和匹配电路形式是放大器设计的关键。设计过程中采用中功率的高效率宽带功率管,使用传输线变压器进行阻抗匹配,采用3 dB 电桥和巴伦线进行分合路,实现了小型化和高效率;并对耦合器、结构等进行了小型化设计。制作调试了 UHF频段150 W 放大器,测试结果效率优于45%,谐波优于20 dBc,尺寸小于241 mm×106 mm×31 mm。
介紹瞭一種小型高性能 UHF 頻段150 W 放大器的設計與實現。 UHF 頻段功率管種類很多,選擇閤適的功率管和匹配電路形式是放大器設計的關鍵。設計過程中採用中功率的高效率寬帶功率管,使用傳輸線變壓器進行阻抗匹配,採用3 dB 電橋和巴倫線進行分閤路,實現瞭小型化和高效率;併對耦閤器、結構等進行瞭小型化設計。製作調試瞭 UHF頻段150 W 放大器,測試結果效率優于45%,諧波優于20 dBc,呎吋小于241 mm×106 mm×31 mm。
개소료일충소형고성능 UHF 빈단150 W 방대기적설계여실현。 UHF 빈단공솔관충류흔다,선택합괄적공솔관화필배전로형식시방대기설계적관건。설계과정중채용중공솔적고효솔관대공솔관,사용전수선변압기진행조항필배,채용3 dB 전교화파륜선진행분합로,실현료소형화화고효솔;병대우합기、결구등진행료소형화설계。제작조시료 UHF빈단150 W 방대기,측시결과효솔우우45%,해파우우20 dBc,척촌소우241 mm×106 mm×31 mm。
This paper introduces the design and realization of a UHF-band 150 W amplifier.There are many kinds of transistor,so choosing appropriate transistor and matching circuit are important for amplifier design.In the design,in order to implement miniature and high efficiency,the intermediate-power high-efficiency wideband transmitter and line transformer are used to perform resistance matc-hing,and 3 dB bridge and balun line are used to perform dividing and combining.The miniature design is implemented for coupler and structure.A UHF-band 150 W amplifier is designed and debugged,the test results show that the efficiency surpasses 45%,the harmoni-zation is higher than 20 dBc,and the dimensions are less than 241 mm×106 mm×31 mm.