矿业安全与环保
礦業安全與環保
광업안전여배보
MINING SAFETY & ENVIRONMENTAL PROTECTION
2014年
4期
66-68,72
,共4页
刘文永%滕福义%王东%刘少泽
劉文永%滕福義%王東%劉少澤
류문영%등복의%왕동%류소택
综放工作面%采空区%煤自燃%采空区浮煤
綜放工作麵%採空區%煤自燃%採空區浮煤
종방공작면%채공구%매자연%채공구부매
fully mechanized top-coal caving face%gob%coal spontaneous combustion%float coal in gob
通过实际观测采空区浮煤状况、工作面推进速度和采空区进回风侧O2浓度的分布规律,根据“三带”划分方法及划分指标,对白羊岭煤矿15101综放工作面进行了“三带”划分,掌握了采空区煤自燃“三带”分布规律及危险区域。15101工作面散热带的分布范围在采空区距离工作面10~100 m,进风侧由于漏风强度较大,散热带宽度较宽。窒息带在距离工作面165 m以上的采空区深部;在工作面回风侧,窒息带的深度约为137 m。氧化升温带宽度在工作面进风侧最大,达到55 m左右。
通過實際觀測採空區浮煤狀況、工作麵推進速度和採空區進迴風側O2濃度的分佈規律,根據“三帶”劃分方法及劃分指標,對白羊嶺煤礦15101綜放工作麵進行瞭“三帶”劃分,掌握瞭採空區煤自燃“三帶”分佈規律及危險區域。15101工作麵散熱帶的分佈範圍在採空區距離工作麵10~100 m,進風側由于漏風彊度較大,散熱帶寬度較寬。窒息帶在距離工作麵165 m以上的採空區深部;在工作麵迴風側,窒息帶的深度約為137 m。氧化升溫帶寬度在工作麵進風側最大,達到55 m左右。
통과실제관측채공구부매상황、공작면추진속도화채공구진회풍측O2농도적분포규률,근거“삼대”화분방법급화분지표,대백양령매광15101종방공작면진행료“삼대”화분,장악료채공구매자연“삼대”분포규률급위험구역。15101공작면산열대적분포범위재채공구거리공작면10~100 m,진풍측유우루풍강도교대,산열대관도교관。질식대재거리공작면165 m이상적채공구심부;재공작면회풍측,질식대적심도약위137 m。양화승온대관도재공작면진풍측최대,체도55 m좌우。
Division of spontaneous combustion “three Zones” in 1510 fully mechanized top-coal caving face in Baiyangling Mine was conducted through the actual observation of the float coal status in the gob, the face advance speed and the distribution law of oxygen concentration on the air intake and return side of the gob and according to the division method and index of spontaneous combustion “three zones”, and the distribution rule of coal spontaneous combustion “three zone” and the danger zone in the gob were kept abreast. The distribution range of the heat radiating zone in 15101 working face was within 10 to 100 m from the gob, and the heat radiating zone on the air intake side was wider due to stronger air leakage. The choking zone was in the deep part of the gob 165m away from the working face. The depth of the choking zone on air return side was about 137 m. The oxidation temperature-rise zone was the widest on the air intake side of the working face, it was about 55 m.