东华大学学报(自然科学版)
東華大學學報(自然科學版)
동화대학학보(자연과학판)
JOURNAL OF DONGHUA UNIVERSITY(NATURAL SCIENCE)
2014年
2期
238-243
,共6页
纺黏非织造布%无土栽培%含液率%芯吸%强度
紡黏非織造佈%無土栽培%含液率%芯吸%彊度
방점비직조포%무토재배%함액솔%심흡%강도
spun-bonded nonwoven fabric%soilless cultivation%moisture capacity%wicking%strength
模拟聚酯(PET)纺黏非织造布作为无土栽培营养液传导基质材料的使用环境,对不同类型PET纺黏非织造布的厚度、干湿强力、芯吸高度、含液率、芯吸速率进行测试,探讨其使用的可行性,为其应用在无土栽培基质中提供参考.研究结果表明:轧光PET纺黏非织造布试样纵向强力最大,湿态下强力略有下降;不同压力下试样的厚度会有一定的变化,且湿态下厚度较小;亲水剂体积分数对试样接触角影响不大;施加压力下轧光试样纵向芯吸高度最大,含液率则未轧光试样纵向最大;不同试样的分段含液率衰减不同,施压下轧光纵向分段含液率衰减最慢.实际应用无土栽培营养液传导基质时,优先选择非织造布纵向排列使用.
模擬聚酯(PET)紡黏非織造佈作為無土栽培營養液傳導基質材料的使用環境,對不同類型PET紡黏非織造佈的厚度、榦濕彊力、芯吸高度、含液率、芯吸速率進行測試,探討其使用的可行性,為其應用在無土栽培基質中提供參攷.研究結果錶明:軋光PET紡黏非織造佈試樣縱嚮彊力最大,濕態下彊力略有下降;不同壓力下試樣的厚度會有一定的變化,且濕態下厚度較小;親水劑體積分數對試樣接觸角影響不大;施加壓力下軋光試樣縱嚮芯吸高度最大,含液率則未軋光試樣縱嚮最大;不同試樣的分段含液率衰減不同,施壓下軋光縱嚮分段含液率衰減最慢.實際應用無土栽培營養液傳導基質時,優先選擇非織造佈縱嚮排列使用.
모의취지(PET)방점비직조포작위무토재배영양액전도기질재료적사용배경,대불동류형PET방점비직조포적후도、간습강력、심흡고도、함액솔、심흡속솔진행측시,탐토기사용적가행성,위기응용재무토재배기질중제공삼고.연구결과표명:알광PET방점비직조포시양종향강력최대,습태하강력략유하강;불동압력하시양적후도회유일정적변화,차습태하후도교소;친수제체적분수대시양접촉각영향불대;시가압력하알광시양종향심흡고도최대,함액솔칙미알광시양종향최대;불동시양적분단함액솔쇠감불동,시압하알광종향분단함액솔쇠감최만.실제응용무토재배영양액전도기질시,우선선택비직조포종향배렬사용.