CAJ | 학술논문

结合X6325T万能摇臂铣床的切削试验和客户反馈问题，对主轴套筒和工作台横向、纵向进给安全离合器安全极限值进行了分析和计算。在端铣刀铣削时，调节主轴套筒安全离合器上弹簧的压力值，当切削力大于该压力时，安全离合器脱开；在圆柱铣刀铣削时，调节横向、纵向进给安全离合器上弹簧的压力值，当切削主分力大于该值时，安全离合器脱开，进给停止，确保操作者的安全。
결합X6325T만능요비선상적절삭시험화객호반궤문제，대주축투통화공작태횡향、종향진급안전리합기안전겁한치진행료분석화계산。재단선도선삭시，조절주축투통안전리합기상탄황적압력치，당절삭력대우해압력시，안전리합기탈개；재원주선도선삭시，조절횡향、종향진급안전리합기상탄황적압력치，당절삭주분력대우해치시，안전리합기탈개，진급정지，학보조작자적안전。
The artical analyzes and calculates the safety ultimate value of spindle quil and table cross,longitudinal clutches,combi-ning the cutting test and customer feedback of radial mil ing machine X6325T. In the trimmer trimming,the spring pressure value on the safety clutch of the spindle socket is adjusted and when cutting pressure is higher than the pressure,the clutch is disengaged;in the cylindrical cutter trimming,the spring pressure value on the safety clutch of lateral and longitudinal feeder is adjusted,when the cutting force is greater than this value,the safety clutch is disengaged,and stopped to ensure the operator safety.