CAJ | 학술논문

针对武钢热轧总厂三分厂现有润滑系统回油管路缺陷，在流量校核满足现场需要的理论基础上，将现有上下主轴集中回油模式改为单独回油模式，并通过管路合理布置避免回油管被下阶梯垫油缸撞坏，从而避免事故发生，节约生产成本。
침대무강열알총엄삼분엄현유윤활계통회유관로결함，재류량교핵만족현장수요적이론기출상，장현유상하주축집중회유모식개위단독회유모식，병통과관로합리포치피면회유관피하계제점유항당배，종이피면사고발생，절약생산성본。
In viewing of the defects of the oil return tube of the spade lubricating system, the concentrating return tube was turned to the separating return line of the upper and down spades,according to the flow check of the tube.And also the reasonable disposal of the return line was considered to avoid the down ladder pad cylinder cracking up the line,which stopped the accident and saved the production costs.