九江职业技术学院学报
九江職業技術學院學報
구강직업기술학원학보
JIUJIANG VOCATIONAL AND TECHNICAL COLLEGE
2014年
3期
81-83
,共3页
正交实验法%单反相机外壳%变形开裂%充填不足%综合平衡法
正交實驗法%單反相機外殼%變形開裂%充填不足%綜閤平衡法
정교실험법%단반상궤외각%변형개렬%충전불족%종합평형법
The orthogonal experiment method%the SLR camera shell%Deformation and cracking%Insuffi-cient packing%integral balance method
针对单反相机机身在实际生产中废品率过高的问题,创建了单反相机机身的三维实体模型和模流分析模型,以熔体流动前沿温度、平均体积收缩率和翘曲变形为质量指标,利用正交试验和多目标综合平衡法分析研究得出该产品的最佳成型工艺参数组合。分析结果表明,CAD/CAE 软件和正交实验法是提高复杂薄壁注塑件产品合格率的有力武器。
針對單反相機機身在實際生產中廢品率過高的問題,創建瞭單反相機機身的三維實體模型和模流分析模型,以鎔體流動前沿溫度、平均體積收縮率和翹麯變形為質量指標,利用正交試驗和多目標綜閤平衡法分析研究得齣該產品的最佳成型工藝參數組閤。分析結果錶明,CAD/CAE 軟件和正交實驗法是提高複雜薄壁註塑件產品閤格率的有力武器。
침대단반상궤궤신재실제생산중폐품솔과고적문제,창건료단반상궤궤신적삼유실체모형화모류분석모형,이용체류동전연온도、평균체적수축솔화교곡변형위질량지표,이용정교시험화다목표종합평형법분석연구득출해산품적최가성형공예삼수조합。분석결과표명,CAD/CAE 연건화정교실험법시제고복잡박벽주소건산품합격솔적유력무기。
In view of the high rejection rate of the SLR camera shell in the process of production ,a three - di-mensional entity model and moldflow analysis model are created ,Then through selecting the melt flow front temper -ature ,volumetric shrinkage and warpage as the main quality indexes ,the optimum injection molding parameters combination was obtained by using orthogonal experiment and multi - objective integral balance method .The analysis results showed that the CAD /CAE software and the orthogonal experiment method are both powerful weapons to improve the acceptability rate of the complex thin - walled injection molding products .