中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2014年
16期
2137-2142,2143
,共7页
孔祥东%艾超%闫桂山%娄霄翔
孔祥東%艾超%閆桂山%婁霄翔
공상동%애초%염계산%루소상
风力发电%同步发电机%液压传动%低电压穿越%摆角直接控制
風力髮電%同步髮電機%液壓傳動%低電壓穿越%襬角直接控製
풍력발전%동보발전궤%액압전동%저전압천월%파각직접공제
wind power generation%synchronous generator%hydraulic transmission%low voltage ride through(LVRT)%direct control of swing angle
以液压型风力发电机组作为研究对象,根据机组低电压穿越控制过程对液压系统功率快速调整的要求,以发电机稳定于工频转速和液压系统瞬态调整时间最短为控制目标,提出一种基于直接控制变量马达摆角的低电压穿越控制方法。以30 kV·A 液压型风力发电机组模拟实验台为仿真和实验平台,针对提出的低电压穿越控制方法展开研究,仿真和实验分析表明,直接控制变量马达摆角的方法具有较好的低电压穿越控制效果。
以液壓型風力髮電機組作為研究對象,根據機組低電壓穿越控製過程對液壓繫統功率快速調整的要求,以髮電機穩定于工頻轉速和液壓繫統瞬態調整時間最短為控製目標,提齣一種基于直接控製變量馬達襬角的低電壓穿越控製方法。以30 kV·A 液壓型風力髮電機組模擬實驗檯為倣真和實驗平檯,針對提齣的低電壓穿越控製方法展開研究,倣真和實驗分析錶明,直接控製變量馬達襬角的方法具有較好的低電壓穿越控製效果。
이액압형풍력발전궤조작위연구대상,근거궤조저전압천월공제과정대액압계통공솔쾌속조정적요구,이발전궤은정우공빈전속화액압계통순태조정시간최단위공제목표,제출일충기우직접공제변량마체파각적저전압천월공제방법。이30 kV·A 액압형풍력발전궤조모의실험태위방진화실험평태,침대제출적저전압천월공제방법전개연구,방진화실험분석표명,직접공제변량마체파각적방법구유교호적저전압천월공제효과。
Taking a hydraulic wind turbine as the research object,a LVRT control method was proposed based on the direct control of the swing angle of the variable motor aiming at rapid adjust-ment of the hydraulic system power requirements.The control target was that the power frequency speed of generator was stabile and the hydraulic system transient adjustment time was short.Using 30kV·A hydraulic wind turbine simulation platform as the simulation and experimental platform,the control method presented for LVRT was researched.Simulation analysis and experimental results show that the LVRT control method based on the direct control of the swing angle of the variable mo-tor has better low voltage ride control.