甘肃冶金
甘肅冶金
감숙야금
GANSU METALLURGY
2014年
4期
50-54,57
,共6页
杨新龙%金武俊%邓武军%朱生春%杨孔德
楊新龍%金武俊%鄧武軍%硃生春%楊孔德
양신룡%금무준%산무군%주생춘%양공덕
高速线材%粗轧%降低堆钢%控制措施
高速線材%粗軋%降低堆鋼%控製措施
고속선재%조알%강저퇴강%공제조시
high-speed wire rod%rough rolling%reduction of piled up steel%controlling measures
研究了酒钢集团炼轧厂二高线作业区高速线材粗轧堆钢的机理,提出了粗中轧堆钢的解决思路和基本方法,通过系统分析,运用张力控制、钢质控制、钢温控制、料型控制、钢头咬入控制,导卫的改善、岗位工的责任心与技能的提高以及设备点巡检的加强等手段,实现了2013年二高线作业区全年粗轧误轧时间仅214 min,较2012年二高线作业区粗轧误轧时间942 min环比降低了728 min,降幅达77.28%,堆钢次数由22次降至7次,降幅达68.2%,中轧废由21支降至5支,降幅达76.2%,创立了二高线作业区粗轧“零”堆钢的纪录。
研究瞭酒鋼集糰煉軋廠二高線作業區高速線材粗軋堆鋼的機理,提齣瞭粗中軋堆鋼的解決思路和基本方法,通過繫統分析,運用張力控製、鋼質控製、鋼溫控製、料型控製、鋼頭咬入控製,導衛的改善、崗位工的責任心與技能的提高以及設備點巡檢的加彊等手段,實現瞭2013年二高線作業區全年粗軋誤軋時間僅214 min,較2012年二高線作業區粗軋誤軋時間942 min環比降低瞭728 min,降幅達77.28%,堆鋼次數由22次降至7次,降幅達68.2%,中軋廢由21支降至5支,降幅達76.2%,創立瞭二高線作業區粗軋“零”堆鋼的紀錄。
연구료주강집단련알엄이고선작업구고속선재조알퇴강적궤리,제출료조중알퇴강적해결사로화기본방법,통과계통분석,운용장력공제、강질공제、강온공제、료형공제、강두교입공제,도위적개선、강위공적책임심여기능적제고이급설비점순검적가강등수단,실현료2013년이고선작업구전년조알오알시간부214 min,교2012년이고선작업구조알오알시간942 min배비강저료728 min,강폭체77.28%,퇴강차수유22차강지7차,강폭체68.2%,중알폐유21지강지5지,강폭체76.2%,창립료이고선작업구조알“령”퇴강적기록。
The mechanism of steel piled up of rough rolling was studied in NO .2 factory of high speed wire rod of Jiuquan iron&steel Co .Ltd, the basic ideas and methods were put forword to reduce piled up steel , by analysis of the system , con-trolling steel of tension, adjusting of rolling gap, improving of guide, controlling steel of quality, temperature, sizes, head biting , improving the job responsibility and operation skills and enhancing inspection of rolling equipments , there were on-ly 214 minutes of rough rolling piled up steel which was 676 minutes litter than 942min of 2012 years and was a drop of 77. 28%,number of piled up steel reduced from 22 to 7 with 68.2%and rolled unless steel reduced from 21 to 5with 76.2%in NO.2 high speed wire rod factory in 2013 years, a record of no piled up steel was created in history of rough rolling of NO . 2 high speed wire rod factory .