CAJ | 학술논문

分析了多晶硅还原炉进料夹液产生的原因及其对生产的影响。主输送管位置高于各还原炉进料管是产生进料夹液的主因，进料夹液易造成还原炉跳停、控制不稳定等故障，可通过降低主输送管的位置、输送管设置电伴热、还原炉进料管配置排液管等措施解决还原炉进料夹液的问题。
분석료다정규환원로진료협액산생적원인급기대생산적영향。주수송관위치고우각환원로진료관시산생진료협액적주인，진료협액역조성환원로도정、공제불은정등고장，가통과강저주수송관적위치、수송관설치전반열、환원로진료관배치배액관등조시해결환원로진료협액적문제。
Analysis the causes of feed clip liquid in the polysilicon reduction furnace and its impact on production.The main reason is that the position of the main conveyor tube is higher than that of feeding tube of each reduction furnace.The feed clip liquid could easily leads to the jump -stop of reduction furnace and instability control etc.By lowing the main conveyor tube position,setting electric heating within the transport,configuring the drain pipe of the reduction furnace feed tube as well as taking other measures to solve the reduction furnace feed clip fluid problems.