中国马铃薯
中國馬鈴藷
중국마령서
CHINESE POTATO
2014年
4期
205-207
,共3页
林团荣%尹玉和%胡冰%韩素娥%邢进%李慧成%韩万军
林糰榮%尹玉和%鬍冰%韓素娥%邢進%李慧成%韓萬軍
림단영%윤옥화%호빙%한소아%형진%리혜성%한만군
克新1号%种植密度%产量%种薯成本
剋新1號%種植密度%產量%種藷成本
극신1호%충식밀도%산량%충서성본
Kexin 1%planting density%yield%seed cost
为了探索机械化种植模式下微型薯生产原种的播种密度对产量的影响,本试验以‘克新1号’微型薯为试验材料,共设计了5个处理,行距为机械化播种行距90 cm,株距分别为15,12,10,9和7 cm。结果表明,试验所设种植密度间产量差异达极显著水平;以播种6000株/667m2产量最高,为2228 kg/667m2;考虑投入产出比最佳密度为6000~7000株/667m2,群体生长较合理,建议在乌兰察布地区大面积生产中推广应用。
為瞭探索機械化種植模式下微型藷生產原種的播種密度對產量的影響,本試驗以‘剋新1號’微型藷為試驗材料,共設計瞭5箇處理,行距為機械化播種行距90 cm,株距分彆為15,12,10,9和7 cm。結果錶明,試驗所設種植密度間產量差異達極顯著水平;以播種6000株/667m2產量最高,為2228 kg/667m2;攷慮投入產齣比最佳密度為6000~7000株/667m2,群體生長較閤理,建議在烏蘭察佈地區大麵積生產中推廣應用。
위료탐색궤계화충식모식하미형서생산원충적파충밀도대산량적영향,본시험이‘극신1호’미형서위시험재료,공설계료5개처리,행거위궤계화파충행거90 cm,주거분별위15,12,10,9화7 cm。결과표명,시험소설충식밀도간산량차이체겁현저수평;이파충6000주/667m2산량최고,위2228 kg/667m2;고필투입산출비최가밀도위6000~7000주/667m2,군체생장교합리,건의재오란찰포지구대면적생산중추엄응용。
In order to understand the effect of minituber planting density on yield under the condition of mechanization planting mode, five treatments were designed using minituber of‘Kexin 1’as plant materials. The row spacing was 90 cm. Planting distances were 15, 12, 10, 9 and 7 cm, respectively. The results showed that there was highly significant difference among tested treatments. The highest yield (2 228 kg/667m2 ) was obtained under the destiny of 6 000 plants/667m2. Considering input-output ratio, the best planting density was 6 000-7 000 plants/667m2. This density should be extended in production of‘Kexin 1’in Wulanchabu area.