CAJ | 학술논문

针对目前复混肥生产装置存在的造粒塔塔底颗粒温度偏高、圆整度差等问题，对广西某高塔造粒过程进行了现场测试，以期为工艺改进提供数据依据。重点介绍了测试方法、测试仪器，并分析了测试结果。结果表明：在造粒塔内，气体平均温升为7．5℃，气固比为15102．49 m3/t，颗粒主要集中在塔半径4．5～7．5 m的圆环内，塔底颗粒体积表面积平均粒径为Φ2．50 mm，颗粒粒径主要集中在Φ2．00～4．00 mm范围内。
침대목전복혼비생산장치존재적조립탑탑저과립온도편고、원정도차등문제，대엄서모고탑조립과정진행료현장측시，이기위공예개진제공수거의거。중점개소료측시방법、측시의기，병분석료측시결과。결과표명：재조립탑내，기체평균온승위7．5℃，기고비위15102．49 m3/t，과립주요집중재탑반경4．5～7．5 m적원배내，탑저과립체적표면적평균립경위Φ2．50 mm，과립립경주요집중재Φ2．00～4．00 mm범위내。
In connection with current problems of compound fertilizer production unit , such as higher temperature of granule at prilling tower bottom and poor spheroidalization , a site test of high tower prilling process in Guanxi Autonomous Region is carried out to provide data reference source for process improvement .The emphasis is put on test method , and test instrument , test results are analyzed.Test results show that in prilling tower , average temperature rising of gas is 7.5 ℃, gas-solid ratio is 15 102.49 m3/t, granules are mainly distributed in circular ring of tower radius 4.5 ~7.5 m, surface mean diameter of granules at the bottom of prilling tower is Φ2.50 mm, most of granule diameter are in range of Φ2.00~4.00 mm.