液晶与显示
液晶與顯示
액정여현시
CHINESE JOURNAL OF LIQUID CRYSTALS AND DISPLAYS
2014年
6期
922-925
,共4页
岱钦%邬小娇%吴杰%毛有明%乌日娜
岱欽%鄔小嬌%吳傑%毛有明%烏日娜
대흠%오소교%오걸%모유명%오일나
手性向列相液晶%染料掺杂液晶激光器%光子态密度%光子禁带
手性嚮列相液晶%染料摻雜液晶激光器%光子態密度%光子禁帶
수성향렬상액정%염료참잡액정격광기%광자태밀도%광자금대
chiral-nematic liquid crystal%dye-doped liquid crystal laser%density of optical state%pho-tonic band edge
设计制作了 PM597染料掺杂手性向列相液晶器件,研究了其激光辐射行为.混合激光染料 PM597、手性剂 S-811、向列相液晶 TEB30A,制成平面态织构的手性向列相液晶激光器件.采用固体 Nd∶YAG 倍频532 nm 波长激光作为抽运光,在光子禁带短波和长波边沿同时获得波长分别为571.1、615.5 nm 的激光输出.对于器件产生激光辐射的机理,采用光子态密度理论进行了分析,根据实际样品各成分的配比,模拟出态密度随波长的变化曲线.在器件中,光子禁带边沿处光子态密度最大,此处器件阈值较低,容易产生激光辐射.
設計製作瞭 PM597染料摻雜手性嚮列相液晶器件,研究瞭其激光輻射行為.混閤激光染料 PM597、手性劑 S-811、嚮列相液晶 TEB30A,製成平麵態織構的手性嚮列相液晶激光器件.採用固體 Nd∶YAG 倍頻532 nm 波長激光作為抽運光,在光子禁帶短波和長波邊沿同時穫得波長分彆為571.1、615.5 nm 的激光輸齣.對于器件產生激光輻射的機理,採用光子態密度理論進行瞭分析,根據實際樣品各成分的配比,模擬齣態密度隨波長的變化麯線.在器件中,光子禁帶邊沿處光子態密度最大,此處器件閾值較低,容易產生激光輻射.
설계제작료 PM597염료참잡수성향렬상액정기건,연구료기격광복사행위.혼합격광염료 PM597、수성제 S-811、향렬상액정 TEB30A,제성평면태직구적수성향렬상액정격광기건.채용고체 Nd∶YAG 배빈532 nm 파장격광작위추운광,재광자금대단파화장파변연동시획득파장분별위571.1、615.5 nm 적격광수출.대우기건산생격광복사적궤리,채용광자태밀도이론진행료분석,근거실제양품각성분적배비,모의출태밀도수파장적변화곡선.재기건중,광자금대변연처광자태밀도최대,차처기건역치교저,용역산생격광복사.
Dye-doped chiral-nematic liquid crystal laser was designed and manufactured,and the laser radiation was researched.The chiral-nematic liquid crystal laser device of planar texture was prepared by doping laser dye PM597 and chiral compound S-81 1 into nematic liquid crystal TEB30A.By using a second harmonic Q-switched Nd∶ YAG pulsed laser (λ= 532 nm)as pumping source,the laser of 571.1,615.5 nm are obtained at the short-wave and long-wave of the photonic band edges.The theory of density of optical state is used to prepare dye-doped cholesteric liquid crystal laser.According to the proper proportion of device component,the curve of density of state varying with the wavelength is simulated.In the device,density of optical state is maximum at the wave of the photonic band edge, threshold is lower and laser radiation is obtained easily.