CAJ | 학술논문

研究了喷水织机专用浆料的制备工艺．采用预乳化乳液聚合工艺，根据相似相容原理及喷水织机用浆料的特殊要求，以功能性单体甲基丙烯酸、软单体丙烯酸乙酯及硬单体甲基丙烯酸甲酯作为聚合单体，探讨了乳化剂用量、引发剂用量及预乳化液滴加时间对浆液性能的影响．结果表明，当乳化剂用量为2.5％，引发剂用量为0.6％，预乳化液滴加时间为3.5h时，制备的喷水织机浆料性能优异，能满足长丝在喷水织机上的织造要求．
연구료분수직궤전용장료적제비공예．채용예유화유액취합공예，근거상사상용원리급분수직궤용장료적특수요구，이공능성단체갑기병희산、연단체병희산을지급경단체갑기병희산갑지작위취합단체，탐토료유화제용량、인발제용량급예유화액적가시간대장액성능적영향．결과표명，당유화제용량위2.5％，인발제용량위0.6％，예유화액적가시간위3.5h시，제비적분수직궤장료성능우이，능만족장사재분수직궤상적직조요구．
According to the similar dissolve mutually theory and the special requirement of sizing agent loom for water-jet the functional monomer methyl acrylic acid ,soft monomer acid ethyl acrylate and hard monomer Methyl methacrylate were used to prepare for the water-jet loom sizing agent by pre-emulsifi-cation emulsion polymerization process .Through experiments ,the influence of emulsifier dosage ,initia-tor dosage and instill time of pre-emulsion to sizing agent performance were studied .The results show that w hen the emulsifier dosage is 2.5% ,initiator dosage is 0.6% ,the instill time of pre-emulsion is 3.5 h ,the sizing agent has got ideal sizing properties ,w hich can satisfy the requirement of the filament on the water-jet loom weaving .