中国陶瓷工业
中國陶瓷工業
중국도자공업
CHINA CERAMIC INDUSTRY
2014年
4期
15-20
,共6页
洪琛%沈华荣%徐强%卢希龙%曹春娥
洪琛%瀋華榮%徐彊%盧希龍%曹春娥
홍침%침화영%서강%로희룡%조춘아
透明釉%裂纹釉%釉面效果%影响因素
透明釉%裂紋釉%釉麵效果%影響因素
투명유%렬문유%유면효과%영향인소
transparent glaze%crackle glaze%glaze effect%inlfuencing factors
本项目以较好的透明裂纹釉配方为基础，考察其釉料组成、工艺参数和烧成制度等对釉面效果的影响。实验结果证明：较好的组成范围是，钠长石为70-78wt.%，高岭土1-3wt.%，石英12-20wt.%，石灰石6-12wt.%；烧成温度为1290℃，保温30 min，冷却速度20℃/min；釉层厚度为0.8~1.3 mm，球磨时间是20 min。所得样品釉面光滑平整、透明度较好，裂纹也具有较好艺术效果。
本項目以較好的透明裂紋釉配方為基礎，攷察其釉料組成、工藝參數和燒成製度等對釉麵效果的影響。實驗結果證明：較好的組成範圍是，鈉長石為70-78wt.%，高嶺土1-3wt.%，石英12-20wt.%，石灰石6-12wt.%；燒成溫度為1290℃，保溫30 min，冷卻速度20℃/min；釉層厚度為0.8~1.3 mm，毬磨時間是20 min。所得樣品釉麵光滑平整、透明度較好，裂紋也具有較好藝術效果。
본항목이교호적투명렬문유배방위기출，고찰기유료조성、공예삼수화소성제도등대유면효과적영향。실험결과증명：교호적조성범위시，납장석위70-78wt.%，고령토1-3wt.%，석영12-20wt.%，석회석6-12wt.%；소성온도위1290℃，보온30 min，냉각속도20℃/min；유층후도위0.8~1.3 mm，구마시간시20 min。소득양품유면광활평정、투명도교호，렬문야구유교호예술효과。
The effects of glaze composition, process parameters and firing systems on glaze result were studied for a better formula of transparent crackle glaze. Experimental results show that the preferable range of the composition is sodium feldspar 70 ~ 78 wt%, kaolin 1 ~ 3 wt%, quartz 12 ~ 20 wt%, limestone 6 ~ 12 wt%; ifring temperature is 1290℃, holding time is 30min, cooling rate is 20 °C/min; glaze layer thickness is 0.8 ~ 1.3 mm, and the milling time is 20min. The glaze surface of the resulted samples was smooth with better transparency and artistic crackle effect.
