CAJ | 학술논문

在海洋石油管线连接中多采用卡爪式连接等机械连接方式，针对此类连接器的安装与维护，设计了一套水下卡爪式连接器安装工具。对此安装工具进行了机械结构的设计，并将其工作过程分为下放、软着陆、加载、二次锁紧、回收五个步骤，将安装工具各部件在工作过程中的作用进行了介绍。针对安装工具关键受力部件在工作过程中受力变化的问题，采用分步分析的方法，找出各个部件在工作过程中受力最大的步骤，建立模型，找出各个部件的受力位置并对其施加约束，从而进行有限元分析，得到各个部件的应力及应变。将数据与其所用材料Q345-D的力学性能相比，完全符合设备的工作要求。
재해양석유관선련접중다채용잡조식련접등궤계련접방식，침대차류련접기적안장여유호，설계료일투수하잡조식련접기안장공구。대차안장공구진행료궤계결구적설계，병장기공작과정분위하방、연착륙、가재、이차쇄긴、회수오개보취，장안장공구각부건재공작과정중적작용진행료개소。침대안장공구관건수력부건재공작과정중수력변화적문제，채용분보분석적방법，조출각개부건재공작과정중수력최대적보취，건립모형，조출각개부건적수력위치병대기시가약속，종이진행유한원분석，득도각개부건적응력급응변。장수거여기소용재료Q345-D적역학성능상비，완전부합설비적공작요구。
Collet connector is one of the mechanical connectors that are widely used in the ocean oil pipeline con-nections.A set of running tools is designed for installation and maintenance of this type of connectors .The mechani-cal structure of the tool is designed , and its work process is divided into five steps:lowering , soft landing , load-ing, secondary locking and retrieving .The function of running tool's parts in the work process is described .For the problem that the load acting on the key parts changes during the work progress , the method of step analysis is used to find out steps in which key parts are under maximum load and a model is built to find out the position of maxi -mum load and constraint of key parts .Based on the above data ,the finite element analysis is carried out , obtaining the stress and strain of key parts .Compared with the mechanical properties of material Q 345-D, the results fully comply with the work requirements of the device .