耐火材料
耐火材料
내화재료
REFRACTORIES
2014年
4期
282-284,287
,共4页
魏军从%张连进%姜乐%宋利宽%王义龙%涂军波
魏軍從%張連進%薑樂%宋利寬%王義龍%塗軍波
위군종%장련진%강악%송리관%왕의룡%도군파
镁橄榄石%镁质浇注料%抗渣渗透性
鎂橄欖石%鎂質澆註料%抗渣滲透性
미감람석%미질요주료%항사삼투성
forsterite%magnesia castables%slag penetration resistance
为降低镁质浇注料的原料成本,用镁橄榄石骨料部分替换镁质浇注料中等粒度的镁砂骨料,研究了镁橄榄石加入量(加入质量分数分别为0、16%、32%)对不同温度(110、1000和1500℃)处理后浇注料性能的影响。结果表明:随着镁橄榄石加入量的增大,浇注料烘干后体积密度减小,显气孔率变小,强度增大;1000和1500℃热处理后,浇注料体积密度减小,显气孔率增大,强度增大,抗渣侵蚀性降低,抗渣渗透性以镁橄榄石加入量为16%(w)时最好。
為降低鎂質澆註料的原料成本,用鎂橄欖石骨料部分替換鎂質澆註料中等粒度的鎂砂骨料,研究瞭鎂橄欖石加入量(加入質量分數分彆為0、16%、32%)對不同溫度(110、1000和1500℃)處理後澆註料性能的影響。結果錶明:隨著鎂橄欖石加入量的增大,澆註料烘榦後體積密度減小,顯氣孔率變小,彊度增大;1000和1500℃熱處理後,澆註料體積密度減小,顯氣孔率增大,彊度增大,抗渣侵蝕性降低,抗渣滲透性以鎂橄欖石加入量為16%(w)時最好。
위강저미질요주료적원료성본,용미감람석골료부분체환미질요주료중등립도적미사골료,연구료미감람석가입량(가입질량분수분별위0、16%、32%)대불동온도(110、1000화1500℃)처리후요주료성능적영향。결과표명:수착미감람석가입량적증대,요주료홍간후체적밀도감소,현기공솔변소,강도증대;1000화1500℃열처리후,요주료체적밀도감소,현기공솔증대,강도증대,항사침식성강저,항사삼투성이미감람석가입량위16%(w)시최호。
Effect of forsterite addition (0,16% and 32%,in mass,the same hereinafter)on properties of castables treated at different temperatures (1 10,1 000 and 1 500 ℃)were researched using forsterite ag-gregate to partially substitute medium particle size magnesia aggregate in MgO castables in order to cut the cost.The results show that with forsterite addition increasing,for the castables after drying,the bulk density and apparent porosity decrease,the strength increases;after fired at 1 000 and 1 500 ℃,the bulk density and slag corrosion resistance decrease,apparent porosity and strength increase,when forsterite addition is 16%,the castables perform the best slag penetration resistance.